diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..838662a --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +SOURCES/python-dmidecode-3.12.2.tar.xz diff --git a/.python-dmidecode.metadata b/.python-dmidecode.metadata new file mode 100644 index 0000000..74e7550 --- /dev/null +++ b/.python-dmidecode.metadata @@ -0,0 +1 @@ +47d26ffcc5a3a6d846568138bce7b3a15f352c13 SOURCES/python-dmidecode-3.12.2.tar.xz diff --git a/SOURCES/disable-old-smbios-warning.patch b/SOURCES/disable-old-smbios-warning.patch new file mode 100644 index 0000000..88b183a --- /dev/null +++ b/SOURCES/disable-old-smbios-warning.patch @@ -0,0 +1,15 @@ +--- a/src/dmidecode.c 2017-03-13 10:29:05.482568934 +0100 ++++ b/src/dmidecode.c 2017-03-13 10:29:21.437336606 +0100 +@@ -5230,12 +5230,6 @@ static void dmi_table(Log_t *logp, int t + return; + } + +- if (ver > SUPPORTED_SMBIOS_VER) { +- log_append(logp, LOGFL_NODUPS, LOG_WARNING, +- "# SMBIOS implementations newer than version %u.%u are not\n" +- "# fully supported by this version of dmidecode.\n", +- SUPPORTED_SMBIOS_VER >> 8, SUPPORTED_SMBIOS_VER & 0xFF); +- } + // FIXME: This is hackerish ... rather try to avoid looping dmi_table() calls too much + if( version_added == 0 ) { + dmixml_AddAttribute(xmlnode, "smbios_version", "%u.%u", ver >> 8, ver & 0xFF); diff --git a/SOURCES/disable_loading_dmidecodemodule_on_non_x86_64.patch b/SOURCES/disable_loading_dmidecodemodule_on_non_x86_64.patch new file mode 100644 index 0000000..b78d5c4 --- /dev/null +++ b/SOURCES/disable_loading_dmidecodemodule_on_non_x86_64.patch @@ -0,0 +1,93 @@ +diff --git a/src/dmidecodemodule.c b/src/dmidecodemodule.c +index 1056a8fe9422..a4500bdd81ac 100644 +--- a/src/dmidecodemodule.c ++++ b/src/dmidecodemodule.c +@@ -40,6 +40,7 @@ + *. ******* AUTOHEADER END v1.1 ******* */ + + #include ++#include + + #include + #include "libxml_wrap.h" +@@ -679,6 +680,9 @@ static PyObject * dmidecode_clear_warnings(PyObject *self, PyObject *null) + Py_RETURN_TRUE; + } + ++static PyMethodDef DMIDataMethods_Dummy[] = { ++ {NULL, NULL, 0, NULL} ++}; + + static PyMethodDef DMIDataMethods[] = { + {(char *)"dump", dmidecode_dump, METH_NOARGS, (char *)"Dump dmidata to set file"}, +@@ -770,6 +774,10 @@ PyMODINIT_FUNC initdmidecodemod(void) + PyObject *module = NULL; + PyObject *version = NULL; + options *opt; ++ struct utsname buf; ++ ++ if (uname(&buf)) ++ return; + + xmlInitParser(); + xmlXPathInit(); +@@ -777,17 +785,22 @@ PyMODINIT_FUNC initdmidecodemod(void) + opt = (options *) malloc(sizeof(options)+2); + memset(opt, 0, sizeof(options)+2); + init(opt); +- module = Py_InitModule3((char *)"dmidecodemod", DMIDataMethods, +- "Python extension module for dmidecode"); + +- version = PyString_FromString(VERSION); +- Py_INCREF(version); +- PyModule_AddObject(module, "version", version); ++ if (memcmp(buf.machine, "x86_64", 6)) ++ module = Py_InitModule3((char *)"dmidecodemod", DMIDataMethods_Dummy, ++ "Python extension module for dummy dmidecode"); ++ else { ++ module = Py_InitModule3((char *)"dmidecodemod", DMIDataMethods, ++ "Python extension module for dmidecode"); + +- opt->dmiversion_n = dmidecode_get_version(opt); +- dmiver = dmixml_GetContent(opt->dmiversion_n); +- PyModule_AddObject(module, "dmi", dmiver ? PyString_FromString(dmiver) : Py_None); ++ version = PyString_FromString(VERSION); ++ Py_INCREF(version); ++ PyModule_AddObject(module, "version", version); + ++ opt->dmiversion_n = dmidecode_get_version(opt); ++ dmiver = dmixml_GetContent(opt->dmiversion_n); ++ PyModule_AddObject(module, "dmi", dmiver ? PyString_FromString(dmiver) : Py_None); ++ } + // Assign this options struct to the module as well with a destructor, that way it will + // clean up the memory for us. + PyModule_AddObject(module, "options", PyCObject_FromVoidPtr(opt, destruct_options)); +diff --git a/unit-tests/unit b/unit-tests/unit +index 8f9184b098c2..6e032a0c18d1 100755 +--- a/unit-tests/unit ++++ b/unit-tests/unit +@@ -4,6 +4,7 @@ + from pprint import pprint + import os, sys, random, tempfile, time + import commands ++import platform + from getopt import getopt + + # Setup temporary sys.path() with our build dir +@@ -135,8 +136,16 @@ def vwrite(msg, vLevel=0): + sys.stdout.write(msg) + sys.stdout.flush() + ++def get_machine(): ++ return platform.machine() ++ + ################################################################################ + ++# no need to test on non-x86_64 ++if get_machine() != "x86_64": ++ print("No need to test on non-x86_64.") ++ sys.exit(0) ++ + #. Let's ignore warnings from the module for the test units... + err = open('/dev/null', 'a+', 0) + os.dup2(err.fileno(), sys.stderr.fileno()) diff --git a/SOURCES/generate-tarball.sh b/SOURCES/generate-tarball.sh new file mode 100755 index 0000000..b266b4b --- /dev/null +++ b/SOURCES/generate-tarball.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +VERSION=$1 + +# git clone ssh://git.fedorahosted.org/git/python-dmidecode.git +# cd python-dmidecode +git archive --format=tar --prefix=python-dmidecode-$VERSION/ -o python-dmidecode-$VERSION.tar v$VERSION +tar -xvf python-dmidecode-$VERSION.tar +rm -r python-dmidecode-$VERSION/debian +tar -cJvf python-dmidecode-$VERSION.tar.xz python-dmidecode-$VERSION diff --git a/SOURCES/revert-interface-changes.patch b/SOURCES/revert-interface-changes.patch new file mode 100644 index 0000000..fb3aced --- /dev/null +++ b/SOURCES/revert-interface-changes.patch @@ -0,0 +1,4131 @@ +--- a/dmidecode.py 2015-06-08 17:19:45.000000000 +0200 ++++ b/dmidecode.py 2010-06-03 12:01:46.000000000 +0200 +@@ -48,7 +48,7 @@ + elif type == DMIXML_DOC: + self.restype = DMIXML_DOC + else: ++ raise TypeError, "Invalid result type value" +- raise TypeError("Invalid result type value") + return True + + def QuerySection(self, sectname): +@@ -65,7 +65,7 @@ + result_type=self.restype, + section=sectname) ) + else: ++ raise TypeError, "Invalid result type value" +- raise TypeError("Invalid result type value") + + return ret + +@@ -83,7 +83,7 @@ + result_type=self.restype, + typeid=tpid)) + else: ++ raise TypeError, "Invalid result type value" +- raise TypeError("Invalid result type value") + + return ret + +--- a/examples/dmidump.py 2015-06-08 17:19:45.000000000 +0200 ++++ b/examples/dmidump.py 2010-06-03 12:01:46.000000000 +0200 +@@ -35,24 +35,24 @@ + "Simple function, dumping out warnings with a prefix if warnings are found and clearing warning buffer" + warn = dmidecode.get_warnings() + if warn: ++ print "### WARNING: %s" % warn +- print("### WARNING: %s" % warn) + dmidecode.clear_warnings() + + + # Check if running as root .... provide a warning if not + root_user = (os.getuid() == 0 and True or False) + if not root_user: ++ print "####" ++ print "#### NOT RUNNING AS ROOT" ++ print "####" ++ print "#### The first run must always be done as root for this example to work." ++ print "#### When not run as root, quite some permission errors might appear" ++ print "####" ++ print "#### If this script is first run as root, it should be possible to run this script" ++ print "#### as an unprivileged user afterwards, with less warnings." ++ print "####" ++ print ++ print +- print("####") +- print("#### NOT RUNNING AS ROOT") +- print("####") +- print("#### The first run must always be done as root for this example to work.") +- print("#### When not run as root, quite some permission errors might appear") +- print("####") +- print("#### If this script is first run as root, it should be possible to run this script") +- print("#### as an unprivileged user afterwards, with less warnings.") +- print("####") +- print() +- print() + + + #. Test for presence of important functions using /dev/mem... Using the legacy API +@@ -61,101 +61,101 @@ + #. for presence of the legacy API, which "under the hood" uses + #. dmidecode.QuerySection(name), where name can be 'bios', 'system', etc. + if root_user: ++ print "*** bios ***\n"; dmidecode.bios() +- print("*** bios ***\n"); dmidecode.bios() + print_warnings() ++ print "*** system ***\n"; dmidecode.system() +- print("*** system ***\n"); dmidecode.system() + print_warnings() ++ print "*** baseboard ***\n"; dmidecode.baseboard() +- print("*** baseboard ***\n"); dmidecode.baseboard() + print_warnings() ++ print "*** chassis ***\n"; dmidecode.chassis() +- print("*** chassis ***\n"); dmidecode.chassis() + print_warnings() ++ print "*** processor ***\n"; dmidecode.processor() +- print("*** processor ***\n"); dmidecode.processor() + print_warnings() ++ print "*** memory ***\n"; dmidecode.memory() +- print("*** memory ***\n"); dmidecode.memory() + print_warnings() ++ print "*** cache ***\n"; dmidecode.cache() +- print("*** cache ***\n"); dmidecode.cache() + print_warnings() ++ print "*** connector ***\n"; dmidecode.connector() +- print("*** connector ***\n"); dmidecode.connector() + print_warnings() ++ print "*** slot ***\n"; dmidecode.slot() +- print("*** slot ***\n"); dmidecode.slot() + print_warnings() + + + #. Now test get/set of memory device file... ++print "*** get_dev()" ++print dmidecode.get_dev() +-print("*** get_dev()") +-print(dmidecode.get_dev()) + print_warnings() ++print "*** set_dev('dmidata.dump')" ++print dmidecode.set_dev("dmidata.dump"); +-print("*** set_dev('dmidata.dump')") +-print(dmidecode.set_dev("dmidata.dump")); + print_warnings() ++print "*** get_dev()" ++print dmidecode.get_dev() +-print("*** get_dev()") +-print(dmidecode.get_dev()) + print_warnings() + + #. Test taking a dump... + if root_user: ++ print "*** Dumping DMI data to dump file" ++ print dmidecode.dump() +- print("*** Dumping DMI data to dump file") +- print(dmidecode.dump()) + print_warnings() + + #. Test reading the dump... Using the preferred API ++print "*** bios ***\n"; pprint(dmidecode.QuerySection('bios')) +-print("*** bios ***\n"); pprint(dmidecode.QuerySection('bios')) + print_warnings() ++print "*** system ***\n"; pprint(dmidecode.QuerySection('system')) +-print("*** system ***\n"); pprint(dmidecode.QuerySection('system')) + print_warnings() ++print "*** baseboard ***\n"; pprint(dmidecode.QuerySection('baseboard')) +-print("*** baseboard ***\n"); pprint(dmidecode.QuerySection('baseboard')) + print_warnings() ++print "*** chassis ***\n"; pprint(dmidecode.QuerySection('chassis')) +-print("*** chassis ***\n"); pprint(dmidecode.QuerySection('chassis')) + print_warnings() ++print "*** processor ***\n"; pprint(dmidecode.QuerySection('processor')) +-print("*** processor ***\n"); pprint(dmidecode.QuerySection('processor')) + print_warnings() ++print "*** memory ***\n"; pprint(dmidecode.QuerySection('memory')) +-print("*** memory ***\n"); pprint(dmidecode.QuerySection('memory')) + print_warnings() ++print "*** cache ***\n"; pprint(dmidecode.QuerySection('cache')) +-print("*** cache ***\n"); pprint(dmidecode.QuerySection('cache')) + print_warnings() ++print "*** connector ***\n"; pprint(dmidecode.QuerySection('connector')) +-print("*** connector ***\n"); pprint(dmidecode.QuerySection('connector')) + print_warnings() ++print "*** slot ***\n"; pprint(dmidecode.QuerySection('slot')) +-print("*** slot ***\n"); pprint(dmidecode.QuerySection('slot')) + print_warnings() + ++print "*** Extracting memory information" +-print("*** Extracting memory information") + for v in dmidecode.memory().values(): + if type(v) == dict and v['dmi_type'] == 17: + pprint(v['data']['Size']), + ++print "*** Querying for DMI type 3 and 7" +-print("*** Querying for DMI type 3 and 7") + pprint(dmidecode.type(3)) # <-- Legacy API + pprint(dmidecode.QueryTypeId(7)) # <-- preferred API + print_warnings() + ++print "*** Querying for the BIOS section" +-print("*** Querying for the BIOS section") + pprint(dmidecode.QuerySection('bios')) + print_warnings() + + # + # Test XML stuff + # ++print ++print ++print ++print "---------------------------------------" ++print "*** *** *** Testing XML API *** *** ***" ++print "---------------------------------------" ++print ++print +-print() +-print() +-print() +-print("---------------------------------------") +-print("*** *** *** Testing XML API *** *** ***") +-print("---------------------------------------") +-print() +-print() + dmixml = dmidecode.dmidecodeXML() + + # Fetch all DMI data into a libxml2.xmlDoc object ++print "*** Getting all DMI data into a XML document variable" +-print("*** Getting all DMI data into a XML document variable") + dmixml.SetResultType(dmidecode.DMIXML_DOC) # Valid values: dmidecode.DMIXML_DOC, dmidecode.DMIXML_NODE + xmldoc = dmixml.QuerySection('all') + + # Dump the XML to dmidump.xml - formated in UTF-8 decoding ++print "*** Dumping XML document to dmidump.xml" +-print("*** Dumping XML document to dmidump.xml") + xmldoc.saveFormatFileEnc('dmidump.xml','UTF-8',1) + + # Do some XPath queries on the XML document ++print "*** Doing some XPath queries against the XML document" +-print("*** Doing some XPath queries against the XML document") + dmixp = xmldoc.xpathNewContext() + + # What to look for - XPath expressions +@@ -168,12 +168,12 @@ + for k in keys: + data = dmixp.xpathEval(k) + for d in data: ++ print "%s: %s" % (k, d.get_content()) +- print("%s: %s" % (k, d.get_content())) + + del dmixp + del xmldoc + + # Query for only a particular DMI TypeID - 0x04 - Processor ++print "*** Quering for Type ID 0x04 - Processor - dumping XML document to stdout" +-print("*** Quering for Type ID 0x04 - Processor - dumping XML document to stdout") + dmixml.QueryTypeId(0x04).saveFormatFileEnc('-','UTF-8',1) + print_warnings() +--- a/Makefile 2015-06-08 17:19:45.000000000 +0200 ++++ b/Makefile 2010-06-03 12:01:46.000000000 +0200 +@@ -38,19 +38,11 @@ + #. $AutoHeaderSerial::20100225 $ + #. ******* AUTOHEADER END v1.2 ******* + ++VERSION := $(shell cd src;python -c "from setup_common import *; print get_version();") +-PY_BIN := python2 +-VERSION := $(shell cd src;$(PY_BIN) -c "from setup_common import *; print(get_version());") + PACKAGE := python-dmidecode ++PY_VER := $(shell python -c 'import sys; print "%d.%d"%sys.version_info[0:2]') +-PY_VER := $(shell $(PY_BIN) -c 'import sys; print("%d.%d"%sys.version_info[0:2])') +-PY_MV := $(shell echo $(PY_VER) | cut -b 1) + PY := python$(PY_VER) ++SO := build/lib.linux-$(shell uname -m)-$(PY_VER)/dmidecodemod.so +-SO_PATH := build/lib.linux-$(shell uname -m)-$(PY_VER) +-ifeq ($(PY_MV),2) +- SO := $(SO_PATH)/dmidecodemod.so +-else +- SOABI := $(shell $(PY_BIN) -c 'import sysconfig; print(sysconfig.get_config_var("SOABI"))') +- SO := $(SO_PATH)/dmidecodemod.$(SOABI).so +-endif + SHELL := /bin/bash + + ############################################################################### +@@ -79,7 +71,6 @@ + -rm -rf build + -rm -rf rpm + -rm -rf src/setup_common.py[oc] +- -rm -rf __pycache__ src/__pycache__ + -rm -rf $(PACKAGE)-$(VERSION) $(PACKAGE)-$(VERSION).tar.gz + $(MAKE) -C unit-tests clean + +--- a/man/dmidecode.8 2015-06-08 17:19:45.000000000 +0200 ++++ b/man/dmidecode.8 2010-06-03 12:01:46.000000000 +0200 +@@ -1,4 +1,4 @@ ++.TH DMIDECODE 8 "October 2008" "dmidecode" +-.TH DMIDECODE 8 "March 2012" "dmidecode" + .SH NAME + dmidecode \- \s-1DMI\s0 table decoder + .SH SYNOPSIS +@@ -127,13 +127,6 @@ + .P + Options --string, --type, --dump and --dump-bin + determine the output format and are mutually exclusive. +-.P +-Please note in case of +-.B dmidecode +-is run on a system with BIOS that boasts new SMBIOS specification, which +-is not supported by the tool yet, it will print out relevant message in +-addition to requested data on the very top of the output. Thus informs the +-output data is not reliable. + + .SH "DMI TYPES" + The \s-1SMBIOS\s0 specification defines the following \s-1DMI\s0 types: +@@ -145,7 +138,7 @@ + Type Information + 0 BIOS + 1 System ++2 Base Board +-2 Baseboard + 3 Chassis + 4 Processor + 5 Memory Controller +@@ -183,9 +176,6 @@ + 37 Memory Channel + 38 IPMI Device + 39 Power Supply +-40 Additional Information +-41 Onboard Devices Extended Information +-42 Management Controller Host Interface + .TE + + Additionally, type 126 is used for disabled entries and type 127 is an +--- a/src/compat.h 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/compat.h 2010-06-03 12:01:46.000000000 +0200 +@@ -40,19 +40,4 @@ + #define Py_RETURN_NONE return Py_INCREF(Py_None), Py_None + #endif + +-// Python 2 vs Python 3 compat +-#if PY_MAJOR_VERSION >= 3 +-#define IS_PY3K +-#define MODINITERROR return NULL +-#define PYNUMBER_FROMLONG PyLong_FromLong +-#define PYTEXT_FROMSTRING PyUnicode_FromString +-#else +-#include +-#define MODINITERROR return +-#define PYNUMBER_FROMLONG PyInt_FromLong +-#define PYTEXT_FROMSTRING PyString_FromString +-#define PyCapsule_New(pointer, name, destructor) \ +- (PyCObject_FromVoidPtr(pointer, destructor)) +-#endif +- + #endif +--- a/src/config.h 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/config.h 2010-06-03 12:01:46.000000000 +0200 +@@ -41,7 +41,7 @@ + #define CONFIG_H + + /* Default memory device file */ ++#ifdef __BEOS__ +-#if defined(__BEOS__) || defined(__HAIKU__) + #define DEFAULT_MEM_DEV "/dev/misc/mem" + #else + #define DEFAULT_MEM_DEV "/dev/mem" +--- a/src/dmidecode.c 2017-10-31 09:06:07.030626683 +0100 ++++ b/src/dmidecode.c 2017-10-31 09:06:30.316273129 +0100 +@@ -2,9 +2,9 @@ + /*. ******* coding:utf-8 AUTOHEADER START v1.1 ******* + *. vim: fileencoding=utf-8 syntax=c sw=2 ts=2 et + *. ++ *. © 2007-2009 Nima Talebi ++ *. © 2009 David Sommerseth ++ *. © 2002-2008 Jean Delvare +- *. © 2007-2013 Nima Talebi +- *. © 2009-2013 David Sommerseth +- *. © 2002-2010 Jean Delvare + *. © 2000-2002 Alan Cox + *. + *. This file is part of Python DMI-Decode. +@@ -44,17 +44,17 @@ + * DMI Decode + * + * Unless specified otherwise, all references are aimed at the "System ++ * Management BIOS Reference Specification, Version 2.6" document, ++ * available from http://www.dmtf.org/standards/smbios/. +- * Management BIOS Reference Specification, Version 2.8.0" document, +- * available from http://www.dmtf.org/standards/smbios. + * + * Note to contributors: + * Please reference every value you add or modify, especially if the + * information does not come from the above mentioned specification. + * + * Additional references: ++ * - Intel AP-485 revision 32 +- * - Intel AP-485 revision 36 + * "Intel Processor Identification and the CPUID Instruction" ++ * http://developer.intel.com/design/xeon/applnots/241618.htm +- * http://www.intel.com/support/processors/sb/cs-009861.htm + * - DMTF Common Information Model + * CIM Schema version 2.19.1 + * http://www.dmtf.org/standards/cim/ +@@ -65,9 +65,6 @@ + * "CPUID Specification" + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25481.pdf + * - BIOS Integrity Services Application Programming Interface version 1.0 +- * - DMTF DSP0239 version 1.1.0 +- * "Management Component Transport Protocol (MCTP) IDs and Codes" +- * http://www.dmtf.org/standards/pmci + * http://www.intel.com/design/archives/wfm/downloads/bisspec.htm + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +@@ -84,16 +81,14 @@ + #include "config.h" + #include "types.h" + #include "util.h" ++#include "dmixml.h" + #include "dmidecode.h" +-#include "dmixml.h" + #include "dmioem.h" + #include "efi.h" + #include "dmidump.h" + + #include "dmihelper.h" + +-#define SUPPORTED_SMBIOS_VER 0x0207 +- + /******************************************************************************* + ** Type-independant Stuff + */ +@@ -173,15 +168,12 @@ + {"Management Device Threshold Data","ManagementDevice", "type", "Threshold Data"}, + {"Memory Channel", "MemoryChannel", NULL, NULL}, + {"IPMI Device", "IPMIdevice", NULL, NULL}, ++ {"Power Supply", "PowerSupply", NULL, NULL} /* 39 */ +- {"Power Supply", "PowerSupply", NULL, NULL}, /* 39 */ +- {"Additional Information", "AdditionalInfo", NULL, NULL}, +- {"Onboard Device", "OnboardDevice", NULL, NULL}, /* 41 */ +- {"Management Controller Host Interface", "MgmntCtrltHostIntf", NULL, NULL}, /* 42 */ + /* *INDENT-ON* */ + }; + xmlNode *type_n = NULL; + ++ if(code <= 39) { +- if(code <= 42) { + type_n = xmlNewChild(node, NULL, (xmlChar *)types[code].tagname, NULL); + assert( type_n != NULL ); + +@@ -262,55 +254,8 @@ + dump_n = NULL; + } + +- +-/* shift is 0 if the value is in bytes, 1 if it is in kilobytes */ +-static void dmi_add_memory_size(xmlNode *node, u64 code, int shift) +-{ +- unsigned long capacity; +- u16 split[7]; +- static const char *unit[8] = { +- "bytes", "kB", "MB", "GB", "TB", "PB", "EB", "ZB" +- }; +- int i; +- +- /* +- * We split the overall size in powers of thousand: EB, PB, TB, GB, +- * MB, kB and B. In practice, it is expected that only one or two +- * (consecutive) of these will be non-zero. +- */ +- split[0] = code.l & 0x3FFUL; +- split[1] = (code.l >> 10) & 0x3FFUL; +- split[2] = (code.l >> 20) & 0x3FFUL; +- split[3] = ((code.h << 2) & 0x3FCUL) | (code.l >> 30); +- split[4] = (code.h >> 8) & 0x3FFUL; +- split[5] = (code.h >> 18) & 0x3FFUL; +- split[6] = code.h >> 28; +- +- /* +- * Now we find the highest unit with a non-zero value. If the following +- * is also non-zero, we use that as our base. If the following is zero, +- * we simply display the highest unit. +- */ +- for (i = 6; i > 0; i--) { +- if (split[i]) +- break; +- } +- if (i > 0 && split[i - 1]) { +- i--; +- capacity = split[i] + (split[i + 1] << 10); +- } else { +- capacity = split[i]; +- } +- +- dmixml_AddAttribute(node, "unit", unit[i + shift]); +- dmixml_AddTextContent(node, "%lu", capacity); +-} +- +- +- +- + /******************************************************************************* ++** 3.3.1 BIOS Information (Type 0) +-** 7.1 BIOS Information (Type 0) + */ + + void dmi_bios_runtime_size(xmlNode *node, u32 code) +@@ -328,7 +273,7 @@ + } + } + ++/* 3.3.1.1 */ +-/* 7.1.1 */ + void dmi_bios_characteristics(xmlNode *node, u64 code) + { + static const char *characteristics[] = { +@@ -351,9 +296,9 @@ + "EDD is supported", + "Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)", + "Japanese floppy for Toshiba 1.2 MB is supported (int 13h)", ++ "5.25\"/360 KB floppy services are supported (int 13h)", +- "5.25\"/360 kB floppy services are supported (int 13h)", + "5.25\"/1.2 MB floppy services are supported (int 13h)", ++ "3.5\"/720 KB floppy services are supported (int 13h)", +- "3.5\"/720 kB floppy services are supported (int 13h)", + "3.5\"/2.88 MB floppy services are supported (int 13h)", + "Print screen service is supported (int 5h)", + "8042 keyboard services are supported (int 9h)", +@@ -362,7 +307,7 @@ + "CGA/mono video services are supported (int 10h)", + "NEC PC-98" /* 31 */ + }; ++ dmixml_AddAttribute(node, "dmispec", "3.3.1.1"); +- dmixml_AddAttribute(node, "dmispec", "7.1.1"); + dmixml_AddAttribute(node, "flags", "0x%04x", code); + + if(code.l&(1<<3)) { +@@ -380,7 +325,7 @@ + } + } + ++/* 3.3.1.2.1 */ +-/* 7.1.2.1 */ + void dmi_bios_characteristics_x1(xmlNode *node, u8 code) + { + int i = 0; +@@ -395,7 +340,7 @@ + "Smart battery" /* 7 */ + }; + ++ dmixml_AddAttribute(node, "dmispec", "3.3.1.2.1"); +- dmixml_AddAttribute(node, "dmispec", "7.1.2.1"); + dmixml_AddAttribute(node, "flags", "0x%04x", code); + + for(i = 0; i <= 7; i++) { +@@ -404,29 +349,27 @@ + } + } + ++/* 3.3.1.2.2 */ +-/* 7.1.2.2 */ + void dmi_bios_characteristics_x2(xmlNode *node, u8 code) + { + int i = 0; + static const char *characteristics[] = { + "BIOS boot specification", /* 0 */ + "Function key-initiated network boot", ++ "Targeted content distribution" /* 2 */ +- "Targeted content distribution", /* 2 */ +- "UEFI is supported", +- "System is a virtual machine" /* 4 */ + }; + ++ dmixml_AddAttribute(node, "dmispec", "3.3.1.2.2"); +- dmixml_AddAttribute(node, "dmispec", "7.1.2.2"); + dmixml_AddAttribute(node, "flags", "0x%04x", code); + ++ for(i = 0; i <= 2; i++) { +- for(i = 0; i <= 4; i++) { + xmlNode *chr_n = dmixml_AddTextChild(node, "characteristic", characteristics[i]); + dmixml_AddAttribute(chr_n, "enabled", "%i", (code & (1 << i) ? 1: 0)); + } + } + + /******************************************************************************* ++** 3.3.2 System Information (Type 1) +-** 7.2 System Information (Type 1) + */ + + void dmi_system_uuid(xmlNode *node, const u8 * p, u16 ver) +@@ -443,9 +386,9 @@ + } + + uuid_n = xmlNewChild(node, NULL, (xmlChar *) "SystemUUID", NULL); ++ dmixml_AddAttribute(uuid_n, "dmispec", "3.3.2"); +- dmixml_AddAttribute(uuid_n, "dmispec", "7.2"); + ++ if(only0xFF ) { +- if(only0xFF) { + dmixml_AddAttribute(uuid_n, "unavailable", "1"); + dmixml_AddTextContent(uuid_n, "Not Present"); + return; +@@ -458,7 +401,7 @@ + } + + /* ++ * As off version 2.6 of the SMBIOS specification, the first 3 +- * As of version 2.6 of the SMBIOS specification, the first 3 + * fields of the UUID are supposed to be encoded on little-endian. + * The specification says that this is the defacto standard, + * however I've seen systems following RFC 4122 instead and use +@@ -478,7 +421,7 @@ + } + } + ++/* 3.3.2.1 */ +-/* 7.2.2 */ + void dmi_system_wake_up_type(xmlNode *node, u8 code) + { + static const char *type[] = { +@@ -494,7 +437,7 @@ + }; + xmlNode *swut_n = xmlNewChild(node, NULL, (xmlChar *) "SystemWakeUpType", NULL); + assert( swut_n != NULL ); ++ dmixml_AddAttribute(swut_n, "dmispec", "3.3.2.1"); +- dmixml_AddAttribute(swut_n, "dmispec", "7.2.2"); + dmixml_AddAttribute(swut_n, "flags", "0x%04x", code); + + if(code <= 0x08) { +@@ -505,10 +448,10 @@ + } + + /******************************************************************************* ++** 3.3.3 Base Board Information (Type 2) +-** 7.3 Base Board Information (Type 2) + */ + ++/* 3.3.3.1 */ +-/* 7.3.1 */ + void dmi_base_board_features(xmlNode *node, u8 code) + { + static const char *features[] = { +@@ -521,7 +464,7 @@ + + xmlNode *feat_n = xmlNewChild(node, NULL, (xmlChar *) "Features", NULL); + assert( feat_n != NULL ); ++ dmixml_AddAttribute(feat_n, "dmispec", "3.3.3.1"); +- dmixml_AddAttribute(feat_n, "dmispec", "7.3.1"); + dmixml_AddAttribute(feat_n, "flags", "0x%04x", code); + + if((code & 0x1F) != 0) { +@@ -539,7 +482,7 @@ + + void dmi_base_board_type(xmlNode *node, const char *tagname, u8 code) + { ++ /* 3.3.3.2 */ +- /* 7.3.2 */ + static const char *type[] = { + "Unknown", /* 0x01 */ + "Other", +@@ -557,7 +500,7 @@ + }; + xmlNode *type_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( type_n != NULL ); ++ dmixml_AddAttribute(type_n, "dmispec", "3.3.3.2"); +- dmixml_AddAttribute(type_n, "dmispec", "7.3.2"); + dmixml_AddAttribute(type_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0D) { +@@ -585,10 +528,10 @@ + } + + /******************************************************************************* ++** 3.3.4 Chassis Information (Type 3) +-** 7.4 Chassis Information (Type 3) + */ + ++/* 3.3.4.1 */ +-/* 7.4.1 */ + void dmi_chassis_type(xmlNode *node, u8 code) + { + static const char *type[] = { +@@ -624,11 +567,9 @@ + }; + xmlNode *type_n = xmlNewChild(node, NULL, (xmlChar *)"ChassisType", NULL); + assert( type_n != NULL ); ++ dmixml_AddAttribute(type_n, "dmispec", "3.3.4.1"); +- dmixml_AddAttribute(type_n, "dmispec", "7.4.1"); + dmixml_AddAttribute(type_n, "flags", "0x%04x", code); + +- code &= 0x7F; /* bits 6:0 are chassis type, 7th bit is the lock bit */ +- + if(code >= 0x01 && code <= 0x1B) { + dmixml_AddAttribute(type_n, "available", "1"); + dmixml_AddTextContent(type_n, "%s", type[code - 0x01]); +@@ -645,25 +586,25 @@ + }; + xmlNode *lock_n = xmlNewChild(node, NULL, (xmlChar *) "ChassisLock", NULL); + assert( lock_n != NULL ); ++ dmixml_AddAttribute(lock_n, "dmispec", "3.3.4"); +- dmixml_AddAttribute(lock_n, "dmispec", "7.4.1"); + dmixml_AddAttribute(lock_n, "flags", "0x%04x", code); + dmixml_AddTextContent(lock_n, "%s", lock[code]); + } + ++/* 3.3.4.2 */ +-/* 7.4.2 */ + void dmi_chassis_state(xmlNode *node, const char *tagname, u8 code) + { + static const char *state[] = { + "Other", /* 0x01 */ + "Unknown", ++ "Safe", /* master.mif says OK */ +- "Safe", + "Warning", + "Critical", + "Non-recoverable" /* 0x06 */ + }; + xmlNode *state_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( state_n != NULL ); ++ dmixml_AddAttribute(state_n, "dmispec", "3.3.4.2"); +- dmixml_AddAttribute(state_n, "dmispec", "7.4.2"); + dmixml_AddAttribute(state_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x06) { +@@ -673,7 +614,7 @@ + } + } + ++/* 3.3.4.3 */ +-/* 7.4.3 */ + void dmi_chassis_security_status(xmlNode *node, u8 code) + { + static const char *status[] = { +@@ -685,7 +626,7 @@ + }; + xmlNode *secstat_n = xmlNewChild(node, NULL, (xmlChar *) "SecurityStatus", NULL); + assert( secstat_n != NULL ); ++ dmixml_AddAttribute(secstat_n, "dmispec", "3.3.4.3"); +- dmixml_AddAttribute(secstat_n, "dmispec", "7.4.3"); + dmixml_AddAttribute(secstat_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x05) { +@@ -750,12 +691,12 @@ + } + + /******************************************************************************* ++** 3.3.5 Processor Information (Type 4) +-** 7.5 Processor Information (Type 4) + */ + + void dmi_processor_type(xmlNode *node, u8 code) + { ++ /* 3.3.5.1 */ +- /* 7.5.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -775,13 +716,13 @@ + } + } + ++void dmi_processor_family(xmlNode *node, const struct dmi_header *h) +-void dmi_processor_family(xmlNode *node, const struct dmi_header *h, u16 ver) + { + const u8 *data = h->data; + unsigned int i, low, high; + u16 code; + ++ /* 3.3.5.2 */ +- /* 7.5.2 */ + static struct { + int value; + const char *name; +@@ -806,8 +747,8 @@ + { 0x11, "Pentium III" }, + { 0x12, "M1" }, + { 0x13, "M2" }, ++ { 0x14, "Celeron M" }, /* From CIM_Processor.Family */ ++ { 0x15, "Pentium 4 HT" }, /* From CIM_Processor.Family */ +- { 0x14, "Celeron M" }, +- { 0x15, "Pentium 4 HT" }, + + { 0x18, "Duron" }, + { 0x19, "K5" }, +@@ -825,10 +766,10 @@ + { 0x25, "Power PC 620" }, + { 0x26, "Power PC x704" }, + { 0x27, "Power PC 750" }, ++ { 0x28, "Core Duo" }, /* From CIM_Processor.Family */ ++ { 0x29, "Core Duo Mobile" }, /* From CIM_Processor.Family */ ++ { 0x2A, "Core Solo Mobile" }, /* From CIM_Processor.Family */ ++ { 0x2B, "Atom" }, /* From CIM_Processor.Family */ +- { 0x28, "Core Duo" }, +- { 0x29, "Core Duo Mobile" }, +- { 0x2A, "Core Solo Mobile" }, +- { 0x2B, "Atom" }, + + { 0x30, "Alpha" }, + { 0x31, "Alpha 21064" }, +@@ -838,14 +779,6 @@ + { 0x35, "Alpha 21164a" }, + { 0x36, "Alpha 21264" }, + { 0x37, "Alpha 21364" }, +- { 0x38, "Turion II Ultra Dual-Core Mobile M" }, +- { 0x39, "Turion II Dual-Core Mobile M" }, +- { 0x3A, "Athlon II Dual-Core M" }, +- { 0x3B, "Opteron 6100" }, +- { 0x3C, "Opteron 4100" }, +- { 0x3D, "Opteron 6200" }, +- { 0x3E, "Opteron 4200" }, +- { 0x3F, "FX" }, + + { 0x40, "MIPS" }, + { 0x41, "MIPS R4000" }, +@@ -853,16 +786,6 @@ + { 0x43, "MIPS R4400" }, + { 0x44, "MIPS R4600" }, + { 0x45, "MIPS R10000" }, +- { 0x46, "C-Series" }, +- { 0x47, "E-Series" }, +- { 0x48, "A-Series" }, +- { 0x49, "G-Series" }, +- { 0x4A, "Z-Series" }, +- { 0x4B, "R-Series" }, +- { 0x4C, "Opteron 4300" }, +- { 0x4D, "Opteron 6300" }, +- { 0x4E, "Opteron 3300" }, +- { 0x4F, "FirePro" }, + + { 0x50, "SPARC" }, + { 0x51, "SuperSPARC" }, +@@ -897,12 +820,12 @@ + { 0x87, "Dual-Core Opteron" }, + { 0x88, "Athlon 64 X2" }, + { 0x89, "Turion 64 X2" }, ++ { 0x8A, "Quad-Core Opteron" }, /* From CIM_Processor.Family */ ++ { 0x8B, "Third-Generation Opteron" }, /* From CIM_Processor.Family */ ++ { 0x8C, "Phenom FX" }, /* From CIM_Processor.Family */ ++ { 0x8D, "Phenom X4" }, /* From CIM_Processor.Family */ ++ { 0x8E, "Phenom X2" }, /* From CIM_Processor.Family */ ++ { 0x8F, "Athlon X2" }, /* From CIM_Processor.Family */ +- { 0x8A, "Quad-Core Opteron" }, +- { 0x8B, "Third-Generation Opteron" }, +- { 0x8C, "Phenom FX" }, +- { 0x8D, "Phenom X4" }, +- { 0x8E, "Phenom X2" }, +- { 0x8F, "Athlon X2" }, + { 0x90, "PA-RISC" }, + { 0x91, "PA-RISC 8500" }, + { 0x92, "PA-RISC 8000" }, +@@ -912,21 +835,17 @@ + { 0x96, "PA-RISC 7100" }, + + { 0xA0, "V30" }, ++ { 0xA1, "Quad-Core Xeon 3200" }, /* From CIM_Processor.Family */ ++ { 0xA2, "Dual-Core Xeon 3000" }, /* From CIM_Processor.Family */ ++ { 0xA3, "Quad-Core Xeon 5300" }, /* From CIM_Processor.Family */ ++ { 0xA4, "Dual-Core Xeon 5100" }, /* From CIM_Processor.Family */ ++ { 0xA5, "Dual-Core Xeon 5000" }, /* From CIM_Processor.Family */ ++ { 0xA6, "Dual-Core Xeon LV" }, /* From CIM_Processor.Family */ ++ { 0xA7, "Dual-Core Xeon ULV" }, /* From CIM_Processor.Family */ ++ { 0xA8, "Dual-Core Xeon 7100" }, /* From CIM_Processor.Family */ ++ { 0xA9, "Quad-Core Xeon 5400" }, /* From CIM_Processor.Family */ ++ { 0xAA, "Quad-Core Xeon" }, /* From CIM_Processor.Family */ ++ +- { 0xA1, "Quad-Core Xeon 3200" }, +- { 0xA2, "Dual-Core Xeon 3000" }, +- { 0xA3, "Quad-Core Xeon 5300" }, +- { 0xA4, "Dual-Core Xeon 5100" }, +- { 0xA5, "Dual-Core Xeon 5000" }, +- { 0xA6, "Dual-Core Xeon LV" }, +- { 0xA7, "Dual-Core Xeon ULV" }, +- { 0xA8, "Dual-Core Xeon 7100" }, +- { 0xA9, "Quad-Core Xeon 5400" }, +- { 0xAA, "Quad-Core Xeon" }, +- { 0xAB, "Dual-Core Xeon 5200" }, +- { 0xAC, "Dual-Core Xeon 7200" }, +- { 0xAD, "Quad-Core Xeon 7300" }, +- { 0xAE, "Quad-Core Xeon 7400" }, +- { 0xAF, "Multi-Core Xeon 7400" }, + { 0xB0, "Pentium III Xeon" }, + { 0xB1, "Pentium III Speedstep" }, + { 0xB2, "Pentium 4" }, +@@ -943,52 +862,24 @@ + { 0xBD, "Core Solo" }, + /* 0xBE handled as a special case */ + { 0xBF, "Core 2 Duo" }, ++ { 0xC0, "Core 2 Solo" }, /* From CIM_Processor.Family */ ++ { 0xC1, "Core 2 Extreme" }, /* From CIM_Processor.Family */ ++ { 0xC2, "Core 2 Quad" }, /* From CIM_Processor.Family */ ++ { 0xC3, "Core 2 Extreme Mobile" }, /* From CIM_Processor.Family */ ++ { 0xC4, "Core 2 Duo Mobile" }, /* From CIM_Processor.Family */ ++ { 0xC5, "Core 2 Solo Mobile" }, /* From CIM_Processor.Family */ ++ +- { 0xC0, "Core 2 Solo" }, +- { 0xC1, "Core 2 Extreme" }, +- { 0xC2, "Core 2 Quad" }, +- { 0xC3, "Core 2 Extreme Mobile" }, +- { 0xC4, "Core 2 Duo Mobile" }, +- { 0xC5, "Core 2 Solo Mobile" }, +- { 0xC6, "Core i7" }, +- { 0xC7, "Dual-Core Celeron" }, + { 0xC8, "IBM390" }, + { 0xC9, "G4" }, + { 0xCA, "G5" }, + { 0xCB, "ESA/390 G6" }, + { 0xCC, "z/Architectur" }, +- { 0xCD, "Core i5" }, +- { 0xCE, "Core i3" }, + + { 0xD2, "C7-M" }, + { 0xD3, "C7-D" }, + { 0xD4, "C7" }, + { 0xD5, "Eden" }, + +- { 0xD6, "Multi-Core Xeon" }, +- { 0xD7, "Dual-Core Xeon 3xxx" }, +- { 0xD8, "Quad-Core Xeon 3xxx" }, +- { 0xD9, "Nano" }, +- { 0xDA, "Dual-Core Xeon 5xxx" }, +- { 0xDB, "Quad-Core Xeon 5xxx" }, +- +- { 0xDD, "Dual-Core Xeon 7xxx" }, +- { 0xDE, "Quad-Core Xeon 7xxx" }, +- { 0xDF, "Multi-Core Xeon 7xxx" }, +- { 0xE0, "Multi-Core Xeon 3400" }, +- +- { 0xE4, "Opteron 3000" }, +- { 0xE5, "Sempron II" }, +- { 0xE6, "Embedded Opteron Quad-Core" }, +- { 0xE7, "Phenom Triple-Core" }, +- { 0xE8, "Turion Ultra Dual-Core Mobile" }, +- { 0xE9, "Turion Dual-Core Mobile" }, +- { 0xEA, "Athlon Dual-Core" }, +- { 0xEB, "Sempron SI" }, +- { 0xEC, "Phenom II" }, +- { 0xED, "Athlon II" }, +- { 0xEE, "Six-Core Opteron" }, +- { 0xEF, "Sempron M" }, +- + { 0xFA, "i860" }, + { 0xFB, "i960" }, + +@@ -1018,18 +909,7 @@ + + xmlNode *family_n = xmlNewChild(node, NULL, (xmlChar *) "Family", NULL); + assert( family_n != NULL ); ++ dmixml_AddAttribute(family_n, "dmispec", "3.3.3.5"); +- dmixml_AddAttribute(family_n, "dmispec", "7.5.2"); +- +- /* Special case for ambiguous value 0x30 (SMBIOS 2.0 only) */ +- if (ver == 0x0200 && data[0x06] == 0x30 && h->length >= 0x08) { +- const char *manufacturer = dmi_string(h, data[0x07]); +- +- if (strstr(manufacturer, "Intel") != NULL +- || strncasecmp(manufacturer, "Intel", 5) == 0) { +- dmixml_AddTextContent(family_n, "Pentium Pro"); +- return; +- } +- } + + code = (data[0x06] == 0xFE && h->length >= 0x2A) ? WORD(data + 0x28) : data[0x06]; + +@@ -1086,7 +966,7 @@ + + xmlNode *dmi_processor_id(xmlNode *node, const struct dmi_header *h) + { ++ /* Intel AP-485 revision 31, table 3-4 */ +- /* Intel AP-485 revision 36, table 2-4 */ + static struct _cpuflags { + const char *flag; + const char *descr; +@@ -1116,13 +996,13 @@ + {"DS", "DS (Debug store)"}, + {"ACPI", "ACPI (ACPI supported)"}, + {"MMX", "MMX (MMX technology supported)"}, ++ {"FXSR", "FXSR (Fast floating-point save and restore)"}, +- {"FXSR", "FXSR (FXSAVE and FXSTOR instructions supported)"}, + {"SSE", "SSE (Streaming SIMD extensions)"}, + {"SSE2", "SSE2 (Streaming SIMD extensions 2)"}, + {"SS", "SS (Self-snoop)"}, ++ {"HTT", "HTT (Hyper-threading technology)"}, +- {"HTT", "HTT (Multi-threading)"}, + {"TM", "TM (Thermal monitor supported)"}, ++ {"IA64", "IA64 (IA64 capabilities)"}, +- {NULL, NULL}, + {"PBE", "PBE (Pending break enabled)"} /* 31 */ + /* *INDENT-ON* */ + }; +@@ -1136,7 +1016,7 @@ + assert( h && h->data ); + type = h->data[0x06]; + p = h->data + 8; ++ version = dmi_string(h, h->data[0x10]); +- version = (char *) dmi_string(h, h->data[0x10]); + + /* + ** Extra flags are now returned in the ECX register when one calls +@@ -1186,25 +1066,22 @@ + dx & 0xF); + return data_n; + } ++ } else if((type >= 0x0B && type <= 0x15) /* Intel, Cyrix */ +- } else if( (type >= 0x0B && type <= 0x15) /* Intel, Cyrix */ + ||(type >= 0x28 && type <= 0x2B) /* Intel */ ++ ||(type >= 0xA1 && type <= 0xAA) /* Intel */ ++ ||(type >= 0xB0 && type <= 0xB3) /* Intel */ ++ ||type == 0xB5 /* Intel */ ++ || (type >= 0xB9 && type <= 0xC5) /* Intel */ ++ ||(type >= 0xD2 && type <= 0xD5) /* VIA */ +- ||(type >= 0xA1 && type <= 0xB3) /* Intel */ +- ||type == 0xB5 /* Intel */ +- ||(type >= 0xB9 && type <= 0xC7) /* Intel */ +- ||(type >= 0xCD && type <= 0xCE) /* Intel */ +- ||(type >= 0xD2 && type <= 0xDB) /* VIA, Intel */ +- ||(type >= 0xDD && type <= 0xE0) /* Intel */ + ) { + + sig = 1; + + } else if((type >= 0x18 && type <= 0x1D) /* AMD */ + ||type == 0x1F /* AMD */ ++ || (type >= 0x83 && type <= 0x8F) /* AMD */ ++ ||(type >= 0xB6 && type <= 0xB7) /* AMD */ ++ ||(type >= 0xE6 && type <= 0xEB) /* AMD */ +- ||(type >= 0x38 && type <= 0x3E) /* AMD */ +- ||(type >= 0x46 && type <= 0x49) /* AMD */ +- ||(type >= 0x83 && type <= 0x8F) /* AMD */ +- ||(type >= 0xB6 && type <= 0xB7) /* AMD */ +- ||(type >= 0xE6 && type <= 0xEF) /* AMD */ + ) { + + sig = 2; +@@ -1258,7 +1135,7 @@ + + edx = DWORD(p + 4); + flags_n = xmlNewChild(data_n, NULL, (xmlChar *) "cpu_flags", NULL); ++ if((edx & 0xFFEFFBFF) != 0) { +- if((edx & 0xBFEFFBFF) != 0) { + int i; + + for(i = 0; i <= 31; i++) { +@@ -1273,7 +1150,7 @@ + return data_n; + } + ++/* 3.3.5.4 */ +-/* 7.5.4 */ + void dmi_processor_voltage(xmlNode *node, u8 code) + { + static const char *voltage[] = { +@@ -1284,7 +1161,7 @@ + int i; + xmlNode *vltg_n = xmlNewChild(node, NULL, (xmlChar *) "Voltages", NULL); + assert( vltg_n != NULL ); ++ dmixml_AddAttribute(vltg_n, "dmispec", "3.3.5.4"); +- dmixml_AddAttribute(vltg_n, "dmispec", "7.5.4"); + dmixml_AddAttribute(vltg_n, "flags", "0x%04x", code); + + if(code & 0x80) { +@@ -1339,7 +1216,7 @@ + + void dmi_processor_upgrade(xmlNode *node, u8 code) + { ++ /* 3.3.5.5 */ +- /* 7.5.5 */ + static const char *upgrade[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -1364,35 +1241,14 @@ + "Socket LGA775", /* 0x15 */ + "Socket S1", + "Socket AM2", ++ "Socket F (1207)" /* 0x18 */ +- "Socket F (1207)", /* 0x18 */ +- "Socket LGA1366", +- "Socket G34", +- "Socket AM3", +- "Socket C32", +- "Socket LGA1156", +- "Socket LGA1567", +- "Socket PGA988A", +- "Socket BGA1288" /* 0x20 */ +- "Socket rPGA988B", +- "Socket BGA1023", +- "Socket BGA1224", +- "Socket BGA1155", +- "Socket LGA1356", +- "Socket LGA2011", +- "Socket FS1", +- "Socket FS2", +- "Socket FM1", +- "Socket FM2", +- "Socket LGA2011-3", +- "Socket LGA1356-3" /* 0x2C */ +- + }; + xmlNode *upgr_n = xmlNewChild(node, NULL, (xmlChar *) "Upgrade", NULL); + assert( upgr_n != NULL ); ++ dmixml_AddAttribute(upgr_n, "dmispec", "3.3.5.5"); +- dmixml_AddAttribute(upgr_n, "dmispec", "7.5.5"); + dmixml_AddAttribute(upgr_n, "flags", "0x%04x", code); + ++ if(code >= 0x01 && code <= 0x15) { +- if(code >= 0x01 && code <= 0x2A) { + dmixml_AddTextContent(upgr_n, "%s", upgrade[code - 0x01]); + } else { + dmixml_AddAttribute(upgr_n, "outofspec", "1"); +@@ -1420,28 +1276,23 @@ + } + } + ++/* 3.3.5.9 */ +-/* 7.5.9 */ + void dmi_processor_characteristics(xmlNode *node, u16 code) + { + static const char *characteristics[] = { + "Unknown", /* 1 */ ++ "64-bit capable" /* 2 */ +- "64-bit capable", /* 2 */ +- "Multi-Core", +- "Hardware Thread", +- "Execute Protection", +- "Enhanced Virtualization", +- "Power/Performance Control" /* 7 */ + }; + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Characteristics", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.5.9"); +- dmixml_AddAttribute(data_n, "dmispec", "7.5.9"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + ++ if((code & 0x0004) != 0) { +- if((code & 0x00FC) != 0) { + int i; + ++ for(i = 1; i <= 2; i++) { +- for(i = 1; i <= 7; i++) { + if(code & (1 << i)) { + dmixml_AddTextChild(data_n, "Flag", "%s", characteristics[i - 1]); + } +@@ -1450,12 +1301,12 @@ + } + + /******************************************************************************* ++** 3.3.6 Memory Controller Information (Type 5) +-** 7.6 Memory Controller Information (Type 5) + */ + + void dmi_memory_controller_ed_method(xmlNode *node, u8 code) + { ++ /* 3.3.6.1 */ +- /* 7.6.1 */ + static const char *method[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -1468,7 +1319,7 @@ + }; + xmlNode *ercm_n = xmlNewChild(node, NULL, (xmlChar *) "CorrectionMethod", NULL); + assert( ercm_n != NULL ); ++ dmixml_AddAttribute(ercm_n, "dmispec", "3.3.6.1"); +- dmixml_AddAttribute(ercm_n, "dmispec", "7.6.1"); + dmixml_AddAttribute(ercm_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x08) { +@@ -1478,7 +1329,7 @@ + } + } + ++/* 3.3.6.2 */ +-/* 7.6.2 */ + void dmi_memory_controller_ec_capabilities(xmlNode *node, const char *tagname, u8 code) + { + static const char *capabilities[] = { +@@ -1492,7 +1343,7 @@ + + xmlNode *cap_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( cap_n != NULL ); ++ dmixml_AddAttribute(cap_n, "dmispec", "3.3.6.2"); +- dmixml_AddAttribute(cap_n, "dmispec", "7.6.2"); + dmixml_AddAttribute(cap_n, "flags", "0x%04x", code); + + if((code & 0x3F) != 0) { +@@ -1509,7 +1360,7 @@ + + void dmi_memory_controller_interleave(xmlNode *node, const char *tagname, u8 code) + { ++ /* 3.3.6.3 */ +- /* 7.6.3 */ + static const char *interleave[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -1521,7 +1372,7 @@ + }; + xmlNode *mci_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( mci_n != NULL ); ++ dmixml_AddAttribute(mci_n, "dmispec", "3.3.6.3"); +- dmixml_AddAttribute(mci_n, "dmispec", "7.6.3"); + dmixml_AddAttribute(mci_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x07) { +@@ -1531,7 +1382,7 @@ + } + } + ++/* 3.3.6.4 */ +-/* 7.6.4 */ + void dmi_memory_controller_speeds(xmlNode *node, u16 code) + { + static struct { +@@ -1546,7 +1397,7 @@ + }; + xmlNode *mcs_n = xmlNewChild(node, NULL, (xmlChar *) "SupportedSpeeds", NULL); + assert( mcs_n != NULL ); ++ dmixml_AddAttribute(mcs_n, "dmispec", "3.3.6.4"); +- dmixml_AddAttribute(mcs_n, "dmispec", "7.6.4"); + dmixml_AddAttribute(mcs_n, "flags", "0x%04x", code); + + if((code & 0x001F) == 0) { +@@ -1578,10 +1429,10 @@ + } + + /******************************************************************************* ++** 3.3.7 Memory Module Information (Type 6) +-** 7.7 Memory Module Information (Type 6) + */ + ++/* 3.3.7.1 */ +-/* 7.7.1 */ + void dmi_memory_module_types(xmlNode *node, const char *tagname, u16 code) + { + static const char *types[] = { +@@ -1599,7 +1450,7 @@ + }; + xmlNode *mmt_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( mmt_n != NULL ); ++ dmixml_AddAttribute(mmt_n, "dmispec", "3.3.7.1"); +- dmixml_AddAttribute(mmt_n, "dmispec", "7.7.1"); + dmixml_AddAttribute(mmt_n, "flags", "0x%04x", code); + + if((code & 0x07FF) != 0) { +@@ -1645,14 +1496,14 @@ + } + } + ++/* 3.3.7.2 */ +-/* 7.7.2 */ + void dmi_memory_module_size(xmlNode *node, const char *tagname, u8 code) + { + int check_conn = 1; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( data_n != NULL ); + ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.7.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.7.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + switch (code & 0x7F) { +@@ -1698,7 +1549,7 @@ + } + + /******************************************************************************* ++** 3.3.8 Cache Information (Type 7) +-** 7.8 Cache Information (Type 7) + */ + static const char *dmi_cache_mode(u8 code) + { +@@ -1723,7 +1574,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "CacheLocation", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.8"); +- dmixml_AddAttribute(data_n, "dmispec", "7.8"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(location[code] != NULL) { +@@ -1737,7 +1588,7 @@ + { + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.8"); +- dmixml_AddAttribute(data_n, "dmispec", "7.8"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code & 0x8000) { +@@ -1749,7 +1600,7 @@ + } + } + ++/* 3.3.8.2 */ +-/* 7.8.2 */ + void dmi_cache_types(xmlNode *node, const char *tagname, u16 code) + { + static const char *types[] = { +@@ -1764,7 +1615,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.8.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.8.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + +@@ -1781,7 +1632,7 @@ + + void dmi_cache_ec_type(xmlNode *node, u8 code) + { ++ /* 3.3.8.3 */ +- /* 7.8.3 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -1792,7 +1643,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "ErrorCorrectionType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.8.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.8.3"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x06) { +@@ -1804,7 +1655,7 @@ + + void dmi_cache_type(xmlNode *node, u8 code) + { ++ /* 3.3.8.4 */ +- /* 7.8.4 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -1814,7 +1665,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "SystemType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.8.4"); +- dmixml_AddAttribute(data_n, "dmispec", "7.8.4"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x05) { +@@ -1826,7 +1677,7 @@ + + void dmi_cache_associativity(xmlNode *node, u8 code) + { ++ /* 3.3.8.5 */ +- /* 7.8.5 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -1835,20 +1686,14 @@ + "4-way Set-associative", + "Fully Associative", + "8-way Set-associative", ++ "16-way Set-associative" /* 0x08 */ +- "16-way Set-associative", /* 0x08 */ +- "12-way Set-associative", +- "24-way Set-associative", +- "32-way Set-associative", +- "48-way Set-associative", +- "64-way Set-associative" /* 0x0D */ +- "20-way Set-associative" /* 0x0E */ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Associativity", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.8.5"); +- dmixml_AddAttribute(data_n, "dmispec", "7.8.5"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + ++ if(code >= 0x01 && code <= 0x08) { +- if(code >= 0x01 && code <= 0x0E) { + dmixml_AddTextContent(data_n, type[code - 0x01]); + } else { + dmixml_AddAttribute(data_n, "outofspec", "1"); +@@ -1856,12 +1701,12 @@ + } + + /******************************************************************************* ++** 3.3.9 Port Connector Information (Type 8) +-** 7.9 Port Connector Information (Type 8) + */ + + void dmi_port_connector_type(xmlNode *node, const char *tpref, u8 code) + { ++ /* 3.3.9.2 */ +- /* 7.9.2 */ + static const char *type[] = { + "None", /* 0x00 */ + "Centronics", +@@ -1909,7 +1754,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Connector", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.9.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.9.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + dmixml_AddAttribute(data_n, "type", "%s", tpref); + +@@ -1926,7 +1771,7 @@ + + void dmi_port_type(xmlNode *node, u8 code) + { ++ /* 3.3.9.3 */ +- /* 7.9.3 */ + static const char *type[] = { + "None", /* 0x00 */ + "Parallel Port XT/AT Compatible", +@@ -1970,7 +1815,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "PortType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.9.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.9.3"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code <= 0x21) { +@@ -1985,12 +1830,12 @@ + } + + /******************************************************************************* ++** 3.3.10 System Slots (Type 9) +-** 7.10 System Slots (Type 9) + */ + + void dmi_slot_type(xmlNode *node, u8 code) + { ++ /* 3.3.10.1 */ +- /* 7.10.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2023,28 +1868,16 @@ + "PCI Express x2", + "PCI Express x4", + "PCI Express x8", ++ "PCI Express x16" /* 0xAA */ +- "PCI Express x16", /* 0xAA */ +- "PCI Express 2", +- "PCI Express 2 x1", +- "PCI Express 2 x2", +- "PCI Express 2 x4", +- "PCI Express 2 x8", +- "PCI Express 2 x16", /* 0xB0 */ +- "PCI Express 3", +- "PCI Express 3 x1", +- "PCI Express 3 x2", +- "PCI Express 3 x4", +- "PCI Express 3 x8", +- "PCI Express 3 x16" /* 0xB6 */ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "SlotType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.10.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.10.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x13) { + dmixml_AddTextContent(data_n, "%s", type[code - 0x01]); ++ } else if(code >= 0xA0 && code <= 0xAA) { +- } else if(code >= 0xA0 && code <= 0xB6) { + dmixml_AddTextContent(data_n, "%s", type_0xA0[code - 0xA0]); + } else { + dmixml_AddAttribute(data_n, "outofspec", "1"); +@@ -2053,7 +1886,7 @@ + + void dmi_slot_bus_width(xmlNode *node, u8 code) + { ++ /* 3.3.10.2 */ +- /* 7.10.2 */ + static const char *width[] = { + "", /* 0x01, "Other" */ + "", /* "Unknown" */ +@@ -2072,7 +1905,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "SlotWidth", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.10.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.10.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if( (code >= 0x01) && (code <= 0x0E) ) { +@@ -2084,7 +1917,7 @@ + + void dmi_slot_current_usage(xmlNode *node, u8 code) + { ++ /* 3.3.10.3 */ +- /* 7.10.3 */ + static const char *usage[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2094,7 +1927,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "CurrentUsage", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.10.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.10.3"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + +@@ -2105,7 +1938,7 @@ + } + } + ++/* 3.3.1O.4 */ +-/* 7.1O.4 */ + void dmi_slot_length(xmlNode *node, u8 code) + { + static const char *length[] = { +@@ -2117,7 +1950,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "SlotLength", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.10.4"); +- dmixml_AddAttribute(data_n, "dmispec", "7.10.4"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x04) { +@@ -2127,7 +1960,7 @@ + } + } + ++/* 3.3.10.5 */ +-/* 7.10.5 */ + void inline set_slottype(xmlNode *node, u8 type) { + switch (type) { + case 0x04: /* MCA */ +@@ -2150,21 +1983,8 @@ + dmixml_AddAttribute(node, "slottype", "PCI-X"); + break; + case 0xA5: /* PCI Express */ +- case 0xA6: /* PCI Express */ +- case 0xA7: /* PCI Express */ +- case 0xA8: /* PCI Express */ +- case 0xA9: /* PCI Express */ +- case 0xAA: /* PCI Express */ + dmixml_AddAttribute(node, "slottype", "PCI Express"); + break; +- case 0xAB: /* PCI Express 2*/ +- case 0xAC: /* PCI Express 2*/ +- case 0xAD: /* PCI Express 2*/ +- case 0xAE: /* PCI Express 2*/ +- case 0xAF: /* PCI Express 2*/ +- case 0xB0: /* PCI Express 2*/ +- dmixml_AddAttribute(node, "slottype", "PCI Express 2"); +- break; + case 0x07: /* PCMCIA */ + dmixml_AddAttribute(node, "slottype", "PCMCIA"); + break; +@@ -2176,7 +1996,7 @@ + void dmi_slot_id(xmlNode *node, u8 code1, u8 code2, u8 type) + { + xmlNode *slotid_n = xmlNewChild(node, NULL, (xmlChar *) "SlotID", NULL); ++ dmixml_AddAttribute(slotid_n, "dmispec", "3.3.10.5"); +- dmixml_AddAttribute(slotid_n, "dmispec", "7.10.5"); + dmixml_AddAttribute(slotid_n, "flags1", "0x%04x", code1); + dmixml_AddAttribute(slotid_n, "flags2", "0x%04x", code2); + dmixml_AddAttribute(slotid_n, "type", "0x%04x", type); +@@ -2195,17 +2015,6 @@ + case 0x12: /* PCI-X */ + case 0x13: /* AGP */ + case 0xA5: /* PCI Express */ +- case 0xA6: /* PCI Express */ +- case 0xA7: /* PCI Express */ +- case 0xA8: /* PCI Express */ +- case 0xA9: /* PCI Express */ +- case 0xAA: /* PCI Express */ +- case 0xAB: /* PCI Express 2 */ +- case 0xAC: /* PCI Express 2 */ +- case 0xAD: /* PCI Express 2 */ +- case 0xAE: /* PCI Express 2 */ +- case 0xAF: /* PCI Express 2 */ +- case 0xB0: /* PCI Express 2 */ + dmixml_AddAttribute(slotid_n, "id", "%i", code1); + break; + case 0x07: /* PCMCIA */ +@@ -2220,7 +2029,7 @@ + + void dmi_slot_characteristics(xmlNode *node, u8 code1, u8 code2) + { ++ /* 3.3.10.6 */ +- /* 7.10.6 */ + static const char *characteristics1[] = { + "5.0 V is provided", /* 1 */ + "3.3 V is provided", +@@ -2231,7 +2040,7 @@ + "Modem ring resume is supported" /* 7 */ + }; + ++ /* 3.3.10.7 */ +- /* 7.10.7 */ + static const char *characteristics2[] = { + "PME signal is supported", /* 0 */ + "Hot-plug devices are supported", +@@ -2239,7 +2048,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "SlotCharacteristics", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.10.6"); +- dmixml_AddAttribute(data_n, "dmispec", "7.10.6, 7.10.7"); + dmixml_AddAttribute(data_n, "flags1", "0x%04x", code1); + dmixml_AddAttribute(data_n, "flags2", "0x%04x", code2); + +@@ -2271,10 +2080,10 @@ + + void dmi_slot_segment_bus_func(xmlNode *node, u16 code1, u8 code2, u8 code3) + { ++ /* 3.3.10.8 */ +- /* 7.10.8 */ + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "BusAddress", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.10.8"); +- dmixml_AddAttribute(data_n, "dmispec", "7.10.8"); + + if(!(code1 == 0xFFFF && code2 == 0xFF && code3 == 0xFF)) { + dmixml_AddTextContent(data_n, "%04x:%02x:%02x.%x", code1, code2, code3 >> 3, code3 & 0x7); +@@ -2282,12 +2091,12 @@ + } + + /******************************************************************************* ++** 3.3.11 On Board Devices Information (Type 10) +-** 7.11 On Board Devices Information (Type 10) + */ + + void dmi_on_board_devices_type(xmlNode *node, u8 code) + { ++ /* 3.3.11.1 */ +- /* 7.11.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2301,7 +2110,7 @@ + "SAS Controller" /* 0x0A */ + }; + ++ dmixml_AddAttribute(node, "dmispec", "3.3.11.1"); +- dmixml_AddAttribute(node, "dmispec", "7.11.1, 7.42.2"); + dmixml_AddAttribute(node, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0A) { +@@ -2311,7 +2120,7 @@ + } + } + ++void dmi_on_board_devices(xmlNode *node, const char *tagname, struct dmi_header *h) +-void dmi_on_board_devices(xmlNode *node, const char *tagname, const struct dmi_header *h) + { + u8 *p = h->data + 4; + u8 count = (h->length - 0x04) / 2; +@@ -2319,7 +2128,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.11"); +- dmixml_AddAttribute(data_n, "dmispec", "7.11"); + + for(i = 0; i < count; i++) { + xmlNode *dev_n = xmlNewChild(data_n, NULL, (xmlChar *) "Device", NULL); +@@ -2327,13 +2136,13 @@ + + dmi_on_board_devices_type(dev_n, p[2 * i] & 0x7F); + dmixml_AddAttribute(dev_n, "Enabled", "%i", ((p[2 * i] & 0x80) ? 1 : 0)); ++ dmixml_AddTextChild(dev_n, "Description", "%s", dmi_string(h, p[2 * i + 1])); +- dmixml_AddDMIstring(dev_n, "Description", h, p[2 * i + 1]); + dev_n = NULL; + } + } + + /******************************************************************************* ++ * 3.3.12 OEM Strings (Type 11) +- * 7.12 OEM Strings (Type 11) + */ + + void dmi_oem_strings(xmlNode *node, struct dmi_header *h) +@@ -2345,14 +2154,14 @@ + dmixml_AddAttribute(node, "count", "%i", count); + + for(i = 1; i <= count; i++) { ++ xmlNode *str_n = dmixml_AddTextChild(node, "Record", "%s", dmi_string(h, i)); +- xmlNode *str_n = dmixml_AddDMIstring(node, "Record", h, i); + assert( str_n != NULL ); + dmixml_AddAttribute(str_n, "index", "%i", i); + } + } + + /******************************************************************************* ++** 3.3.13 System Configuration Options (Type 12) +-** 7.13 System Configuration Options (Type 12) + */ + + void dmi_system_configuration_options(xmlNode *node, struct dmi_header *h) +@@ -2363,11 +2172,11 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Options", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.13"); +- dmixml_AddAttribute(data_n, "dmispec", "7.13"); + dmixml_AddAttribute(data_n, "count", "%i", count); + + for(i = 1; i <= count; i++) { ++ xmlNode *o_n = dmixml_AddTextChild(data_n, "Option", "%s", dmi_string(h, i)); +- xmlNode *o_n = dmixml_AddDMIstring(data_n, "Option", h, i); + assert( o_n != NULL ); + + dmixml_AddAttribute(o_n, "index", "%ld", i); +@@ -2375,10 +2184,10 @@ + } + + /******************************************************************************* ++** 3.3.14 BIOS Language Information (Type 13) +-** 7.14 BIOS Language Information (Type 13) + */ + ++void dmi_bios_languages(xmlNode *node, struct dmi_header *h) +-void dmi_bios_languages(xmlNode *node, struct dmi_header *h, u8 brevity_code) + { + u8 *p = h->data + 4; + u8 count = p[0x00]; +@@ -2386,29 +2195,23 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Installed", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.14"); +- dmixml_AddAttribute(data_n, "dmispec", "7.14"); + dmixml_AddAttribute(data_n, "count", "%i", count); + +- if (brevity_code & 0x01) { +- dmixml_AddAttribute(data_n, "format", "Abbreviated"); +- } else { +- dmixml_AddAttribute(data_n, "format", "Long"); +- } +- + for(i = 1; i <= count; i++) { ++ xmlNode *l_n = dmixml_AddTextChild(data_n, "Language", "%s", dmi_string(h, i)); +- xmlNode *l_n = dmixml_AddDMIstring(data_n, "Language", h, i); + assert( l_n != NULL ); + dmixml_AddAttribute(l_n, "index", "%i", i); + } + } + + /******************************************************************************* ++** 3.3.15 Group Associations (Type 14) +-** 7.15 Group Associations (Type 14) + */ + + void dmi_group_associations_items(xmlNode *node, u8 count, const u8 * p) + { ++ dmixml_AddAttribute(node, "dmispec", "3.3.15"); +- dmixml_AddAttribute(node, "dmispec", "7.15"); + dmixml_AddAttribute(node, "items", "%i", count); + + int i; +@@ -2422,7 +2225,7 @@ + } + + /******************************************************************************* ++** 3.3.16 System Event Log (Type 15) +-** 7.16 System Event Log (Type 15) + */ + + void dmi_event_log_method(xmlNode *node, u8 code) +@@ -2437,7 +2240,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "AccessMethod", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.16"); +- dmixml_AddAttribute(data_n, "dmispec", "7.16"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code <= 0x04) { +@@ -2463,9 +2266,10 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Status", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.16"); +- dmixml_AddAttribute(data_n, "dmispec", "7.16"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + ++ // FIXME: Should we use 0/1 instead of strings? + dmixml_AddAttribute(data_n, "Full", "%s", full[(code >> 1) & 1]); + dmixml_AddAttribute(data_n, "Valid", "%s", valid[(code >> 0) & 1]); + } +@@ -2474,10 +2278,10 @@ + { + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Address", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.16.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.16.3"); + dmixml_AddAttribute(data_n, "method", "0x%04x", method); + ++ /* 3.3.16.3 */ +- /* 7.16.3 */ + switch (method) { + case 0x00: + case 0x01: +@@ -2505,7 +2309,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Format", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.16"); +- dmixml_AddAttribute(data_n, "dmispec", "7.16"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code <= 0x01) { +@@ -2519,7 +2323,7 @@ + + void dmi_event_log_descriptor_type(xmlNode *node, u8 code) + { ++ /* 3.3.16.6.1 */ +- /* 7.16.6.1 */ + static const char *type[] = { + NULL, /* 0x00 */ + "Single-bit ECC memory error", +@@ -2549,7 +2353,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Descriptor", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.16.6.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.16.6.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code <= 0x17 && type[code] != NULL) { +@@ -2565,7 +2369,7 @@ + + void dmi_event_log_descriptor_format(xmlNode *node, u8 code) + { ++ /* 3.3.16.6.2 */ +- /* 7.16.6.2 */ + static const char *format[] = { + "None", /* 0x00 */ + "Handle", +@@ -2578,7 +2382,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Format", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.16.6.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.16.6.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code <= 0x06) { +@@ -2592,10 +2396,10 @@ + + void dmi_event_log_descriptors(xmlNode *node, u8 count, const u8 len, const u8 * p) + { ++ /* 3.3.16.1 */ +- /* 7.16.1 */ + int i; + ++ dmixml_AddAttribute(node, "dmispec", "3.3.16.1"); +- dmixml_AddAttribute(node, "dmispec", "7.16.1"); + + for(i = 0; i < count; i++) { + if(len >= 0x02) { +@@ -2609,12 +2413,12 @@ + } + + /******************************************************************************* ++** 3.3.17 Physical Memory Array (Type 16) +-** 7.17 Physical Memory Array (Type 16) + */ + + void dmi_memory_array_location(xmlNode *node, u8 code) + { ++ /* 3.3.17.1 */ +- /* 7.17.1 */ + static const char *location[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2637,12 +2441,12 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Location", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.17.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.17.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0A) { + dmixml_AddTextContent(data_n, location[code - 0x01]); ++ } else if(code >= 0xA0 && code <= 0xA4) { +- } else if(code >= 0xA0 && code <= 0xA3) { + dmixml_AddTextContent(data_n, location_0xA0[code - 0xA0]); + } else { + dmixml_AddAttribute(data_n, "outofspec", "1"); +@@ -2651,7 +2455,7 @@ + + void dmi_memory_array_use(xmlNode *node, u8 code) + { ++ /* 3.3.17.2 */ +- /* 7.17.2 */ + static const char *use[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2663,7 +2467,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Use", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.17.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.17.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x07) { +@@ -2675,7 +2479,7 @@ + + void dmi_memory_array_ec_type(xmlNode *node, u8 code) + { ++ /* 3.3.17.3 */ +- /* 7.17.3 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2688,7 +2492,7 @@ + + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "ErrorCorrectionType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.17.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.17.3"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x07) { +@@ -2698,23 +2502,25 @@ + } + } + ++void dmi_memory_array_capacity(xmlNode *node, u32 code) +-void dmi_memory_array_capacity(xmlNode *node, struct dmi_header *h, const u8 *data) + { + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "MaxCapacity", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + ++ if(code == 0x8000000) { ++ dmixml_AddAttribute(data_n, "unknown", "1"); ++ } else { ++ if((code & 0x000FFFFF) == 0) { ++ dmixml_AddAttribute(data_n, "unit", "GB"); ++ dmixml_AddTextContent(data_n, "%i", code >> 20); ++ } else if((code & 0x000003FF) == 0) { ++ dmixml_AddAttribute(data_n, "unit", "MB"); ++ dmixml_AddTextContent(data_n, "%i", code >> 10); +- if(DWORD(data + 0x07) == 0x8000000) { +- if( h->length < 0x17 ) { +- dmixml_AddAttribute(data_n, "unknown", "1"); + } else { ++ dmixml_AddAttribute(data_n, "unit", "KB"); ++ dmixml_AddTextContent(data_n, "%i", code); +- dmi_add_memory_size(data_n, QWORD(data + 0x0F), 0); + } +- } else { +- u64 capacity; +- +- capacity.h = 0; +- capacity.l = DWORD(data + 0x07); +- dmi_add_memory_size(data_n, capacity, 1); + } + } + +@@ -2733,7 +2539,7 @@ + } + + /******************************************************************************* ++** 3.3.18 Memory Device (Type 17) +-** 7.18 Memory Device (Type 17) + */ + + void dmi_memory_device_width(xmlNode *node, const char *tagname, u16 code) +@@ -2769,33 +2575,9 @@ + } + } + +- +-static void dmi_memory_device_extended_size(xmlNode *node, u32 code) +-{ +- xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Size", NULL); +- assert( data_n != NULL ); +- +- code &= 0x7FFFFFFFUL; +- dmixml_AddAttribute(data_n, "flags", "0x%08x", code); +- dmixml_AddAttribute(data_n, "mode", "extended"); +- +- /* Use the most suitable unit depending on size */ +- if (code & 0x3FFUL) { +- dmixml_AddAttribute(data_n, "unit", "MB"); +- dmixml_AddTextContent(data_n, "%lu", (unsigned long) code); +- } else if (code & 0xFFFFFUL) { +- dmixml_AddAttribute(data_n, "unit", "GB"); +- dmixml_AddTextContent(data_n, "%lu", (unsigned long) code >> 10); +- } else { +- dmixml_AddAttribute(data_n, "unit", "TB"); +- dmixml_AddTextContent(data_n, "%lu", (unsigned long) code >> 20); +- } +-} +- +- + void dmi_memory_device_form_factor(xmlNode *node, u8 code) + { ++ /* 3.3.18.1 */ +- /* 7.18.1 */ + static const char *form_factor[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2815,7 +2597,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "FormFactor", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.18.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.18.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0F) { +@@ -2840,7 +2622,7 @@ + + void dmi_memory_device_type(xmlNode *node, u8 code) + { ++ /* 3.3.18.2 */ +- /* 7.18.2 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2861,19 +2643,14 @@ + "RDRAM", + "DDR", + "DDR2", ++ "DDR2 FB-DIMM" /* 0x14 */ +- "DDR2 FB-DIMM", /* 0x14 */ +- "Reserved", +- "Reserved", +- "Reserved", +- "DDR3" +- "FBD2" /* 0x19 */ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Type", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.18.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.18.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + ++ if(code >= 0x01 && code <= 0x14) { +- if(code >= 0x01 && code <= 0x19) { + dmixml_AddTextContent(data_n, "%s", type[code - 0x01]); + } else { + dmixml_AddAttribute(data_n, "outofspec", "1"); +@@ -2882,7 +2659,7 @@ + + void dmi_memory_device_type_detail(xmlNode *node, u16 code) + { ++ /* 3.3.18.3 */ +- /* 7.18.3 */ + static const char *detail[] = { + "Other", /* 1 */ + "Unknown", +@@ -2895,19 +2672,16 @@ + "EDO", + "Window DRAM", + "Cache DRAM", ++ "Non-Volatile" /* 12 */ +- "Non-Volatile", /* 12 */ +- "Registered (Buffered)", +- "Unbuffered (Unregistered)", /* 14 */ +- "LRDIMM" /* 15 */ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "TypeDetails", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.18.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.18.3"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if((code & 0x1FFE) != 0) { + int i; ++ for(i = 1; i <= 12; i++) { +- for(i = 1; i <= 14; i++) { + if(code & (1 << i)) { + xmlNode *td_n = dmixml_AddTextChild(data_n, "flag", "%s", detail[i - 1]); + assert( td_n != NULL ); +@@ -2917,40 +2691,28 @@ + } + } + ++void dmi_memory_device_speed(xmlNode *node, u16 code) +-void dmi_memory_device_speed(xmlNode *node, const char *tag, u16 code) + { ++ xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Speed", NULL); +- xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tag, NULL); + assert( data_n != NULL ); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code == 0) { + dmixml_AddAttribute(data_n, "unknown", "1"); + } else { ++ dmixml_AddAttribute(data_n, "speed_ns", "%.1f", (float) 1000 / code); + dmixml_AddAttribute(data_n, "unit", "MHz"); + dmixml_AddTextContent(data_n, "%i", code); + } + } + +-void dmi_memory_voltage_value(xmlNode *node, const char *tag, u16 code) { +- xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tag, NULL); +- assert( data_n != NULL ); +- dmixml_AddAttribute(data_n, "flags", "0x%04x", code); +- +- if (code == 0) { +- dmixml_AddAttribute(data_n, "unknown", "1"); +- } else { +- dmixml_AddAttribute(data_n, "unit", "V"); +- dmixml_AddTextContent(data_n, "%.3f", (float)(i16)code / 1000); +- } +-} +- + /******************************************************************************* ++* 3.3.19 32-bit Memory Error Information (Type 18) +-* 7.19 32-bit Memory Error Information (Type 18) + */ + + void dmi_memory_error_type(xmlNode *node, u8 code) + { ++ /* 3.3.19.1 */ +- /* 7.19.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2969,7 +2731,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Type", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.19.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.19.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0E) { +@@ -2981,7 +2743,7 @@ + + void dmi_memory_error_granularity(xmlNode *node, u8 code) + { ++ /* 3.3.19.2 */ +- /* 7.19.2 */ + static const char *granularity[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -2990,7 +2752,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Granularity", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.19.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.19.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x04) { +@@ -3002,7 +2764,7 @@ + + void dmi_memory_error_operation(xmlNode *node, u8 code) + { ++ /* 3.3.19.3 */ +- /* 7.19.3 */ + static const char *operation[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3012,7 +2774,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Operation", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.19.3"); +- dmixml_AddAttribute(data_n, "dmispec", "7.19.3"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x05) { +@@ -3047,45 +2809,32 @@ + } + + /******************************************************************************* ++** 3.3.20 Memory Array Mapped Address (Type 19) +-** 7.20 Memory Array Mapped Address (Type 19) + */ + + void dmi_mapped_address_size(xmlNode *node, u32 code) + { + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "RangeSize", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.19.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.20"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code == 0) { + dmixml_AddAttribute(data_n, "invalid", "1"); ++ } else if((code & 0x000FFFFF) == 0) { ++ dmixml_AddAttribute(data_n, "unit", "GB"); ++ dmixml_AddTextContent(data_n, "%i", code >> 20); ++ } else if((code & 0x000003FF) == 0) { ++ dmixml_AddAttribute(data_n, "unit", "MB"); ++ dmixml_AddTextContent(data_n, "%i", code >> 10); + } else { ++ dmixml_AddAttribute(data_n, "unit", "KB"); ++ dmixml_AddTextContent(data_n, "%i", code); +- u64 size; +- +- size.h = 0; +- size.l = code; +- dmi_add_memory_size(data_n, size, 1); +- } +-} +- +-void dmi_mapped_address_extended_size(xmlNode *node, u64 start, u64 end) +-{ +- xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "RangeSize", NULL); +- assert( data_n != NULL ); +- dmixml_AddAttribute(data_n, "dmispec", "7.20"); +- dmixml_AddAttribute(data_n, "mode", "extended"); +- dmixml_AddAttribute(data_n, "start_address", "0x%08x%08x", start.h, start.l); +- dmixml_AddAttribute(data_n, "end_address", "0x%08x%08x", end.h, end.l); +- +- if(start.h == end.h && start.l == end.l) { +- dmixml_AddAttribute(data_n, "invalid", "1"); +- } else { +- dmi_add_memory_size(data_n, u64_range(start, end), 0); + } + } + + /******************************************************************************* ++** 3.3.21 Memory Device Mapped Address (Type 20) +-** 7.21 Memory Device Mapped Address (Type 20) + */ + + void dmi_mapped_address_row_position(xmlNode *node, u8 code) +@@ -3127,12 +2876,12 @@ + } + + /******************************************************************************* ++** 3.3.22 Built-in Pointing Device (Type 21) +-** 7.22 Built-in Pointing Device (Type 21) + */ + + void dmi_pointing_device_type(xmlNode *node, u8 code) + { ++ /* 3.3.22.1 */ +- /* 7.22.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3146,7 +2895,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "DeviceType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.22.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.22.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x09) { +@@ -3158,7 +2907,7 @@ + + void dmi_pointing_device_interface(xmlNode *node, u8 code) + { ++ /* 3.3.22.2 */ +- /* 7.22.2 */ + static const char *interface[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3176,7 +2925,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "DeviceInterface", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.22.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.22.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x08) { +@@ -3189,12 +2938,12 @@ + } + + /******************************************************************************* ++** 3.3.23 Portable Battery (Type 22) +-** 7.23 Portable Battery (Type 22) + */ + + void dmi_battery_chemistry(xmlNode *node, u8 code) + { ++ /* 3.3.23.1 */ +- /* 7.23.1 */ + static const char *chemistry[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3207,7 +2956,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "BatteryChemistry", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.22.2"); +- dmixml_AddAttribute(data_n, "dmispec", "7.22.2"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x08) { +@@ -3256,7 +3005,7 @@ + } + + /******************************************************************************* ++** 3.3.24 System Reset (Type 23) +-** 7.24 System Reset (Type 23) + */ + + void dmi_system_reset_boot_option(xmlNode *node, const char *tagname, u8 code) +@@ -3305,7 +3054,7 @@ + } + + /******************************************************************************* ++ * 3.3.25 Hardware Security (Type 24) +- * 7.25 Hardware Security (Type 24) + */ + + void dmi_hardware_security_status(xmlNode *node, const char *tagname, u8 code) +@@ -3323,7 +3072,7 @@ + } + + /******************************************************************************* ++** 3.3.26 System Power Controls (Type 25) +-** 7.26 System Power Controls (Type 25) + */ + + #define DMI_POWER_CTRL_TIME_STR(dest, variant, data) \ +@@ -3332,11 +3081,11 @@ + + void dmi_power_controls_power_on(xmlNode *node, const char *tagname, const u8 * p) + { ++ /* 3.3.26.1 */ +- /* 7.26.1 */ + char timestr[5][5]; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) tagname, NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.26.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.26.1"); + dmixml_AddAttribute(data_n, "flags", "0x%08x", p); + + DMI_POWER_CTRL_TIME_STR(timestr[0], dmi_bcd_range(p[0], 0x01, 0x12), p[0]) +@@ -3351,12 +3100,12 @@ + } + + /******************************************************************************* ++* 3.3.27 Voltage Probe (Type 26) +-* 7.27 Voltage Probe (Type 26) + */ + + void dmi_voltage_probe_location(xmlNode *node, u8 code) + { ++ /* 3.3.27.1 */ +- /* 7.27.1 */ + static const char *location[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3372,7 +3121,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Location", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.27.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.27.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0B) { +@@ -3384,7 +3133,7 @@ + + void dmi_probe_status(xmlNode *node, u8 code) + { ++ /* 3.3.27.1 */ +- /* 7.27.1 */ + static const char *status[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3395,7 +3144,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Status", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.27.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.27.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x06) { +@@ -3448,12 +3197,12 @@ + } + + /******************************************************************************* ++** 3.3.28 Cooling Device (Type 27) +-** 7.28 Cooling Device (Type 27) + */ + + void dmi_cooling_device_type(xmlNode *node, u8 code) + { ++ /* 3.3.28.1 */ +- /* 7.28.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3471,7 +3220,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Type", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.28.1", code); +- dmixml_AddAttribute(data_n, "dmispec", "7.28.1", code); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x09) { +@@ -3498,12 +3247,12 @@ + } + + /******************************************************************************* ++** 3.3.29 Temperature Probe (Type 28) +-** 7.29 Temperature Probe (Type 28) + */ + + void dmi_temperature_probe_location(xmlNode *node, u8 code) + { ++ /* 3.3.29.1 */ +- /* 7.29.1 */ + static const char *location[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3523,7 +3272,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Location", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.29.1", code); +- dmixml_AddAttribute(data_n, "dmispec", "7.29.1", code); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0F) { +@@ -3562,7 +3311,7 @@ + } + + /******************************************************************************* ++** 3.3.30 Electrical Current Probe (Type 29) +-** 7.30 Electrical Current Probe (Type 29) + */ + + void dmi_current_probe_value(xmlNode *node, const char *tagname, u16 code) +@@ -3594,7 +3343,7 @@ + } + + /******************************************************************************* ++** 3.3.33 System Boot Information (Type 32) +-** 7.33 System Boot Information (Type 32) + */ + + void dmi_system_boot_status(xmlNode *node, u8 code) +@@ -3626,7 +3375,7 @@ + } + + /******************************************************************************* ++** 3.3.34 64-bit Memory Error Information (Type 33) +-** 7.34 64-bit Memory Error Information (Type 33) + */ + + void dmi_64bit_memory_error_address(xmlNode *node, const char *tagname, u64 code) +@@ -3642,12 +3391,12 @@ + } + + /******************************************************************************* ++** 3.3.35 Management Device (Type 34) +-** 7.35 Management Device (Type 34) + */ + + void dmi_management_device_type(xmlNode *node, u8 code) + { ++ /* 3.3.35.1 */ +- /* 7.35.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3665,7 +3414,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Type", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.35.1", code); +- dmixml_AddAttribute(data_n, "dmispec", "7.35.1", code); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x0D) { +@@ -3677,7 +3426,7 @@ + + void dmi_management_device_address_type(xmlNode *node, u8 code) + { ++ /* 3.3.35.2 */ +- /* 7.35.2 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3687,7 +3436,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "AddressType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.35.2", code); +- dmixml_AddAttribute(data_n, "dmispec", "7.35.2", code); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x05) { +@@ -3698,12 +3447,12 @@ + } + + /******************************************************************************* ++** 3.3.38 Memory Channel (Type 37) +-** 7.38 Memory Channel (Type 37) + */ + + void dmi_memory_channel_type(xmlNode *node, u8 code) + { ++ /* 3.3.38.1 */ +- /* 7.38.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3712,7 +3461,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Type", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.38.1", code); +- dmixml_AddAttribute(data_n, "dmispec", "7.38.1", code); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x04) { +@@ -3736,12 +3485,12 @@ + } + + /******************************************************************************* ++** 3.3.39 IPMI Device Information (Type 38) +-** 7.39 IPMI Device Information (Type 38) + */ + + void dmi_ipmi_interface_type(xmlNode *node, u8 code) + { ++ /* 3.3.39.1 and IPMI 2.0, appendix C1, table C1-2 */ +- /* 7.39.1 and IPMI 2.0, appendix C1, table C1-2 */ + static const char *type[] = { + "Unknown", /* 0x00 */ + "KCS (Keyboard Control Style)", +@@ -3751,7 +3500,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "InterfaceType", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.39.1", code); +- dmixml_AddAttribute(data_n, "dmispec", "7.39.1", code); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code <= 0x04) { +@@ -3798,7 +3547,7 @@ + } + + /******************************************************************************* ++** 3.3.40 System Power Supply (Type 39) +-** 7.40 System Power Supply (Type 39) + */ + + void dmi_power_supply_power(xmlNode *node, u16 code) +@@ -3817,7 +3566,7 @@ + + void dmi_power_supply_type(xmlNode *node, u8 code) + { ++ /* 3.3.40.1 */ +- /* 7.40.1 */ + static const char *type[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3830,7 +3579,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Type", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.40.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.40.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x08) { +@@ -3842,7 +3591,7 @@ + + void dmi_power_supply_status(xmlNode *node, u8 code) + { ++ /* 3.3.40.1 */ +- /* 7.40.1 */ + static const char *status[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3852,7 +3601,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "Status", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.40.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.40.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + dmixml_AddAttribute(data_n, "present", "1"); + +@@ -3865,7 +3614,7 @@ + + void dmi_power_supply_range_switching(xmlNode *node, u8 code) + { ++ /* 3.3.40.1 */ +- /* 7.40.1 */ + static const char *switching[] = { + "Other", /* 0x01 */ + "Unknown", +@@ -3876,7 +3625,7 @@ + }; + xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "VoltageRangeSwitching", NULL); + assert( data_n != NULL ); ++ dmixml_AddAttribute(data_n, "dmispec", "3.3.40.1"); +- dmixml_AddAttribute(data_n, "dmispec", "7.40.1"); + dmixml_AddAttribute(data_n, "flags", "0x%04x", code); + + if(code >= 0x01 && code <= 0x06) { +@@ -3887,7 +3636,7 @@ + } + + /* ++** 3.3.41 Additional Information (Type 40) +-** 7.41 Additional Information (Type 40) + ** + ** Proper support of this entry type would require redesigning a large part of + ** the code, so I am waiting to see actual implementations of it to decide +@@ -3922,7 +3671,7 @@ + dmixml_AddAttribute(data_n, "ReferenceHandle", "0x%04x", WORD(p + 0x01)); + dmixml_AddAttribute(data_n, "ReferenceOffset", "0x%02x", p[0x03]); + ++ str_n = dmixml_AddTextChild(data_n, "String", "%s", dmi_string(h, p[0x04])); +- str_n = dmixml_AddDMIstring(data_n, "String", h, p[0x04]); + + switch (length - 0x05) { + case 1: +@@ -3945,39 +3694,6 @@ + } + } + +-/* +- * 7.43 Management Controller Host Interface (Type 42) +- */ +- +-xmlNode * dmi_management_controller_host_type(xmlNode *node, u8 code) +-{ +- /* DMTF DSP0239 (MCTP) version 1.1.0 */ +- static const char *type[] = { +- "KCS: Keyboard Controller Style", /* 0x02 */ +- "8250 UART Register Compatible", +- "16450 UART Register Compatible", +- "16550/16550A UART Register Compatible", +- "16650/16650A UART Register Compatible", +- "16750/16750A UART Register Compatible", +- "16850/16850A UART Register Compatible" /* 0x08 */ +- }; +- xmlNode *data_n = xmlNewChild(node, NULL, (xmlChar *) "ManagementControllerHost", NULL); +- +- assert( data_n != NULL ); +- dmixml_AddAttribute(data_n, "dmispec", "7.43"); +- dmixml_AddAttribute(data_n, "flags", "0x%04x", code); +- +- if (code >= 0x02 && code <= 0x08) { +- dmixml_AddTextChild(data_n, "Type", "%s", type[code - 0x01]); +- } else if (code == 0xF0) { +- dmixml_AddTextChild(data_n, "Type", "OEM"); +- } else { +- dmixml_AddAttribute(data_n, "outofspec", "1"); +- } +- return data_n; +-} +- +- + /******************************************************************************* + ** Main + */ +@@ -3997,14 +3713,14 @@ + dmixml_AddTextChild(sect_n, "DMIdescription", "%s", dmiMajor->desc); + + switch (h->type) { ++ case 0: /* 3.3.1 BIOS Information */ +- case 0: /* 7.1 BIOS Information */ + if(h->length < 0x12) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Vendor", "%s", dmi_string(h, data[0x04])); ++ dmixml_AddTextChild(sect_n, "Version", "%s", dmi_string(h, data[0x05])); ++ dmixml_AddTextChild(sect_n, "ReleaseDate", "%s", dmi_string(h, data[0x08])); +- dmixml_AddDMIstring(sect_n, "Vendor", h, data[0x04]); +- dmixml_AddDMIstring(sect_n, "Version", h, data[0x05]); +- dmixml_AddDMIstring(sect_n, "ReleaseDate", h, data[0x08]); + + /* + * On IA-64, the BIOS base address will read 0 because +@@ -4063,15 +3779,15 @@ + } + break; + ++ case 1: /* 3.3.2 System Information */ +- case 1: /* 7.2 System Information */ + if(h->length < 0x08) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Manufacturer", "%s", dmi_string(h, data[0x04])); ++ dmixml_AddTextChild(sect_n, "ProductName", "%s", dmi_string(h, data[0x05])); ++ dmixml_AddTextChild(sect_n, "Version", "%s", dmi_string(h, data[0x06])); ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x07])); +- dmixml_AddDMIstring(sect_n, "Manufacturer", h, data[0x04]); +- dmixml_AddDMIstring(sect_n, "ProductName", h, data[0x05]); +- dmixml_AddDMIstring(sect_n, "Version", h, data[0x06]); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x07]); + + if(h->length < 0x19) { + break; +@@ -4085,29 +3801,29 @@ + break; + } + ++ dmixml_AddTextChild(sect_n, "SKUnumber", "%s", dmi_string(h, data[0x19])); ++ dmixml_AddTextChild(sect_n, "Family", "%s", dmi_string(h, data[0x1A])); +- dmixml_AddDMIstring(sect_n, "SKUnumber", h, data[0x19]); +- dmixml_AddDMIstring(sect_n, "Family", h, data[0x1A]); + break; + ++ case 2: /* 3.3.3 Base Board Information */ +- case 2: /* 7.3 Base Board Information */ + if(h->length < 0x08) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Manufacturer", "%s", dmi_string(h, data[0x04])); ++ dmixml_AddTextChild(sect_n, "ProductName", "%s", dmi_string(h, data[0x05])); ++ dmixml_AddTextChild(sect_n, "Version", "%s", dmi_string(h, data[0x06])); ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x07])); +- dmixml_AddDMIstring(sect_n, "Manufacturer", h, data[0x04]); +- dmixml_AddDMIstring(sect_n, "ProductName", h, data[0x05]); +- dmixml_AddDMIstring(sect_n, "Version", h, data[0x06]); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x07]); + + if(h->length < 0x0F) { + break; + } + ++ dmixml_AddTextChild(sect_n, "AssetTag", "%s", dmi_string(h, data[0x08])); +- dmixml_AddDMIstring(sect_n, "AssetTag", h, data[0x08]); + + dmi_base_board_features(sect_n, data[0x09]); + ++ dmixml_AddTextChild(sect_n, "ChassisLocation", "%s", dmi_string(h, data[0x0A])); +- dmixml_AddDMIstring(sect_n, "ChassisLocation", h, data[0x0A]); + dmixml_AddTextChild(sect_n, "ChassisHandle", "0x%04x", WORD(data + 0x0B)); + + dmi_base_board_type(sect_n, "Type", data[0x0D]); +@@ -4119,17 +3835,17 @@ + dmi_base_board_handles(sect_n, data[0x0E], data + 0x0F); + break; + ++ case 3: /* 3.3.4 Chassis Information */ +- case 3: /* 7.4 Chassis Information */ + if(h->length < 0x09) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Manufacturer", "%s", dmi_string(h, data[0x04])); ++ dmi_chassis_type(sect_n, data[0x05] & 0x7F); +- dmixml_AddDMIstring(sect_n, "Manufacturer", h, data[0x04]); +- dmi_chassis_type(sect_n, data[0x05]); + dmi_chassis_lock(sect_n, data[0x05] >> 7); ++ dmixml_AddTextChild(sect_n, "Version", "%s", dmi_string(h, data[0x06])); ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x07])); ++ dmixml_AddTextChild(sect_n, "AssetTag", "%s", dmi_string(h, data[0x08])); +- dmixml_AddDMIstring(sect_n, "Version", h, data[0x06]); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x07]); +- dmixml_AddDMIstring(sect_n, "AssetTag", h, data[0x08]); + + if(h->length < 0x0D) { + break; +@@ -4163,29 +3879,24 @@ + } + + dmi_chassis_elements(sect_n, data[0x13], data[0x14], data + 0x15); +- if (h->length < 0x16 + data[0x13] * data[0x14]) { +- break; +- } +- dmixml_AddDMIstring(sect_n, "SKUnumber", h, data[0x15 + data[0x13] * data[0x14]]); +- + break; + ++ case 4: /* 3.3.5 Processor Information */ +- case 4: /* 7.5 Processor Information */ + if(h->length < 0x1A) { + break; + } + ++ dmixml_AddTextChild(sect_n, "SocketDesignation", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "SocketDesignation", h, data[0x04]); + dmi_processor_type(sect_n, data[0x05]); ++ dmi_processor_family(sect_n, h); +- dmi_processor_family(sect_n, h, ver); + + dmi_processor_id(sect_n, h); + + sub_n = xmlNewChild(sect_n, NULL, (xmlChar *) "Manufacturer", NULL); + assert( sub_n != NULL ); ++ dmixml_AddTextChild(sub_n, "Vendor", dmi_string(h, data[0x07])); +- dmixml_AddDMIstring(sub_n, "Vendor", h, data[0x07]); + ++ dmixml_AddTextChild(sub_n, "Version", dmi_string(h, data[0x10])); +- dmixml_AddDMIstring(sub_n, "Version", h, data[0x10]); + sub_n = NULL; + + dmi_processor_voltage(sect_n, data[0x11]); +@@ -4251,9 +3962,9 @@ + break; + } + ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x20])); ++ dmixml_AddTextChild(sect_n, "AssetTag", "%s", dmi_string(h, data[0x21])); ++ dmixml_AddTextChild(sect_n, "PartNumber", "%s", dmi_string(h, data[0x22])); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x20]); +- dmixml_AddDMIstring(sect_n, "AssetTag", h, data[0x21]); +- dmixml_AddDMIstring(sect_n, "PartNumber", h, data[0x22]); + + if(h->length < 0x28) { + break; +@@ -4278,7 +3989,7 @@ + sub_n = NULL; + break; + ++ case 5: /* 3.3.6 Memory Controller Information */ +- case 5: /* 7.6 Memory Controller Information */ + if(h->length < 0x0F) { + break; + } +@@ -4321,12 +4032,12 @@ + data[0x0F + data[0x0E] * sizeof(u16)]); + break; + ++ case 6: /* 3.3.7 Memory Module Information */ +- case 6: /* 7.7 Memory Module Information */ + if(h->length < 0x0C) { + break; + } + ++ dmixml_AddTextChild(sect_n, "SocketDesignation", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "SocketDesignation", h, data[0x04]); + dmi_memory_module_connections(sect_n, data[0x05]); + dmi_memory_module_speed(sect_n, "ModuleSpeed", data[0x06]); + dmi_memory_module_types(sect_n, "Type", WORD(data + 0x07)); +@@ -4336,12 +4047,12 @@ + dmi_memory_module_error(sect_n, data[0x0B]); + break; + ++ case 7: /* 3.3.8 Cache Information */ +- case 7: /* 7.8 Cache Information */ + if(h->length < 0x0F) { + break; + } + ++ dmixml_AddTextChild(sect_n, "SocketDesignation", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "SocketDesignation", h, data[0x04]); + dmixml_AddAttribute(sect_n, "Enabled", "%i", (WORD(data + 0x05) & 0x0080 ? 1 : 0)); + dmixml_AddAttribute(sect_n, "Socketed", "%i", (WORD(data + 0x05) & 0x0008 ? 1 : 0)); + dmixml_AddAttribute(sect_n, "Level", "%ld", ((WORD(data + 0x05) & 0x0007) + 1)); +@@ -4368,19 +4079,19 @@ + dmi_cache_associativity(sect_n, data[0x12]); + break; + ++ case 8: /* 3.3.9 Port Connector Information */ +- case 8: /* 7.9 Port Connector Information */ + if(h->length < 0x09) { + break; + } + ++ sub_n = dmixml_AddTextChild(sect_n, "DesignatorRef", dmi_string(h, data[0x04])); +- sub_n = dmixml_AddDMIstring(sect_n, "DesignatorRef", h, data[0x04]); + assert( sub_n != NULL ); + dmixml_AddAttribute(sub_n, "type", "internal"); + sub_n = NULL; + + dmi_port_connector_type(sect_n, "internal", data[0x05]); + ++ sub_n = dmixml_AddTextChild(sect_n, "DesignatorRef", dmi_string(h, data[0x06])); +- sub_n = dmixml_AddDMIstring(sect_n, "DesignatorRef", h, data[0x06]); + assert( sub_n != NULL ); + dmixml_AddAttribute(sub_n, "type", "external"); + sub_n = NULL; +@@ -4389,12 +4100,12 @@ + dmi_port_type(sect_n, data[0x08]); + break; + ++ case 9: /* 3.3.10 System Slots */ +- case 9: /* 7.10 System Slots */ + if(h->length < 0x0C) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Designation", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Designation", h, data[0x04]); + + dmi_slot_bus_width(sect_n, data[0x06]); + dmi_slot_type(sect_n, data[0x05]); +@@ -4409,11 +4120,11 @@ + } + break; + ++ case 10: /* 3.3.11 On Board Devices Information */ +- case 10: /* 7.11 On Board Devices Information */ + dmi_on_board_devices(sect_n, "dmi_on_board_devices", h); + break; + ++ case 11: /* 3.3.12 OEM Strings */ +- case 11: /* 7.12 OEM Strings */ + if(h->length < 0x05) { + break; + } +@@ -4421,7 +4132,7 @@ + dmi_oem_strings(sect_n, h); + break; + ++ case 12: /* 3.3.13 System Configuration Options */ +- case 12: /* 7.13 System Configuration Options */ + if(h->length < 0x05) { + break; + } +@@ -4429,22 +4140,22 @@ + dmi_system_configuration_options(sect_n, h); + break; + ++ case 13: /* 3.3.14 BIOS Language Information */ +- case 13: /* 7.14 BIOS Language Information */ + if(h->length < 0x16) { + break; + } + + dmixml_AddAttribute(sect_n, "installable_languages", "%i", data[0x04]); + ++ dmi_bios_languages(sect_n, h); +- dmi_bios_languages(sect_n, h, data[0x05]); + break; + ++ case 14: /* 3.3.15 Group Associations */ +- case 14: /* 7.15 Group Associations */ + if(h->length < 0x05) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Name", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Name", h, data[0x04]); + + sub_n = xmlNewChild(sect_n, NULL, (xmlChar *) "Groups", NULL); + assert( sub_n != NULL ); +@@ -4452,7 +4163,7 @@ + sub_n = NULL; + break; + ++ case 15: /* 3.3.16 System Event Log */ +- case 15: /* 7.16 System Event Log */ + // SysEventLog - sect_n + if(h->length < 0x14) { + break; +@@ -4509,7 +4220,7 @@ + sub_n = NULL; + break; + ++ case 16: /* 3.3.17 Physical Memory Array */ +- case 16: /* 7.17 Physical Memory Array */ + if(h->length < 0x0F) { + break; + } +@@ -4518,11 +4229,11 @@ + dmi_memory_array_location(sect_n, data[0x04]); + dmi_memory_array_use(sect_n, data[0x05]); + dmi_memory_array_ec_type(sect_n, data[0x06]); ++ dmi_memory_array_capacity(sect_n, DWORD(data + 0x07)); +- dmi_memory_array_capacity(sect_n, h, data); + dmi_memory_array_error_handle(sect_n, WORD(data + 0x0B)); + break; + ++ case 17: /* 3.3.18 Memory Device */ +- case 17: /* 7.18 Memory Device */ + if(h->length < 0x15) { + break; + } +@@ -4532,15 +4243,11 @@ + + dmi_memory_device_width(sect_n, "TotalWidth", WORD(data + 0x08)); + dmi_memory_device_width(sect_n, "DataWidth", WORD(data + 0x0A)); ++ dmi_memory_device_size(sect_n, WORD(data + 0x0C)); +- if (h->length >= 0x20 && WORD(data + 0x0C) == 0x7FFF) { +- dmi_memory_device_extended_size(sect_n, WORD(data + 0x1C)); +- } else { +- dmi_memory_device_size(sect_n, WORD(data + 0x0C)); +- } + dmi_memory_device_form_factor(sect_n, data[0x0E]); + dmi_memory_device_set(sect_n, data[0x0F]); ++ dmixml_AddTextChild(sect_n, "Locator", dmi_string(h, data[0x10])); ++ dmixml_AddTextChild(sect_n, "BankLocator", dmi_string(h, data[0x11])); +- dmixml_AddDMIstring(sect_n, "Locator", h, data[0x10]); +- dmixml_AddDMIstring(sect_n, "BankLocator", h, data[0x11]); + + dmi_memory_device_type(sect_n, data[0x12]); + dmi_memory_device_type_detail(sect_n, WORD(data + 0x13)); +@@ -4549,43 +4256,20 @@ + break; + } + ++ dmi_memory_device_speed(sect_n, WORD(data + 0x15)); +- dmi_memory_device_speed(sect_n, "Speed", WORD(data + 0x15)); + + if(h->length < 0x1B) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Manufacturer", "%s", dmi_string(h, data[0x17])); ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x18])); ++ dmixml_AddTextChild(sect_n, "AssetTag", "%s", dmi_string(h, data[0x19])); ++ dmixml_AddTextChild(sect_n, "PartNumber", "%s", dmi_string(h, data[0x1A])); +- dmixml_AddDMIstring(sect_n, "Manufacturer", h, data[0x17]); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x18]); +- dmixml_AddDMIstring(sect_n, "AssetTag", h, data[0x19]); +- dmixml_AddDMIstring(sect_n, "PartNumber", h, data[0x1A]); +- +- if(h->length < 0x1C) { +- break; +- } +- +- dmixml_AddTextChild(sect_n, "Rank", "%u", data[0x1B] & 0x0F); +- +- if(h->length < 0x22) { +- break; +- } +- +- dmi_memory_device_speed(sect_n, "CurrentClockSpeed", WORD(data + 0x20)); +- +- if(h->length < 0x28) { +- break; +- } +- sub_n = xmlNewChild(sect_n, NULL, (xmlChar *) "MemoryVoltage", NULL); +- assert( sub_n != NULL ); +- dmi_memory_voltage_value(sub_n, "Minimum", WORD(data + 0x22)); +- dmi_memory_voltage_value(sub_n, "Maximum", WORD(data + 0x24)); +- dmi_memory_voltage_value(sub_n, "Current", WORD(data + 0x26)); +- sub_n = NULL; +- + break; + ++ case 18: /* 3.3.19 32-bit Memory Error Information */ ++ case 33: /* 3.3.34 64-bit Memory Error Information */ +- case 18: /* 7.19 32-bit Memory Error Information */ +- case 33: /* 7.34 64-bit Memory Error Information */ + if( h->type == 18 ) { + dmixml_AddAttribute(sect_n, "bits", "32"); + } else { +@@ -4616,32 +4300,23 @@ + } + break; + ++ case 19: /* 3.3.20 Memory Array Mapped Address */ +- case 19: /* 7.20 Memory Array Mapped Address */ + if(h->length < 0x0F) { + break; + } + ++ dmixml_AddTextChild(sect_n, "StartAddress", "0x%08x%03x", ++ (DWORD(data + 0x04) >> 2), ++ (DWORD(data + 0x04) & 0x3) << 10); ++ dmixml_AddTextChild(sect_n, "EndAddress", "0x%08x%03x", ++ (DWORD(data + 0x08) >> 2), ++ ((DWORD(data + 0x08) & 0x3) << 10) + 0x3FF); ++ dmi_mapped_address_size(sect_n, DWORD(data + 0x08) - DWORD(data + 0x04) + 1); +- if (h->length >= 0x1F && DWORD(data + 0x04) == 0xFFFFFFFF) { +- u64 start, end; +- +- start = QWORD(data + 0x0F); +- end = QWORD(data + 0x17); +- dmi_mapped_address_extended_size(sect_n, start, end); +- } else { +- dmixml_AddTextChild(sect_n, "StartAddress", "0x%08x%03x", +- (DWORD(data + 0x04) >> 2), +- (DWORD(data + 0x04) & 0x3) << 10); +- dmixml_AddTextChild(sect_n, "EndAddress", "0x%08x%03x", +- (DWORD(data + 0x08) >> 2), +- ((DWORD(data + 0x08) & 0x3) << 10) + 0x3FF); +- dmi_mapped_address_size(sect_n, DWORD(data + 0x08) - DWORD(data + 0x04) + 1); +- } +- + dmixml_AddTextChild(sect_n, "PhysicalArrayHandle", "0x%04x", WORD(data + 0x0C)); + dmixml_AddTextChild(sect_n, "PartitionWidth", "%i", data[0x0F]); + break; + ++ case 20: /* 3.3.21 Memory Device Mapped Address */ +- case 20: /* 7.21 Memory Device Mapped Address */ + if(h->length < 0x13) { + break; + } +@@ -4665,7 +4340,7 @@ + dmi_mapped_address_interleaved_data_depth(sect_n, data[0x12]); + break; + ++ case 21: /* 3.3.22 Built-in Pointing Device */ +- case 21: /* 7.22 Built-in Pointing Device */ + if(h->length < 0x07) { + break; + } +@@ -4675,23 +4350,23 @@ + dmixml_AddTextChild(sect_n, "Buttons", "%i", data[0x06]); + break; + ++ case 22: /* 3.3.23 Portable Battery */ +- case 22: /* 7.23 Portable Battery */ + if(h->length < 0x10) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Location", "%s", dmi_string(h, data[0x04])); ++ dmixml_AddTextChild(sect_n, "Manufacturer", "%s", dmi_string(h, data[0x05])); +- dmixml_AddDMIstring(sect_n, "Location", h, data[0x04]); +- dmixml_AddDMIstring(sect_n, "Manufacturer", h, data[0x05]); + + if(data[0x06] || h->length < 0x1A) { ++ dmixml_AddTextChild(sect_n, "ManufactureDate", "%s", dmi_string(h, data[0x06])); +- dmixml_AddDMIstring(sect_n, "ManufactureDate", h, data[0x06]); + } + + if(data[0x07] || h->length < 0x1A) { ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x07])); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x07]); + } + ++ dmixml_AddTextChild(sect_n, "Name", "%s", dmi_string(h, data[0x08])); +- dmixml_AddDMIstring(sect_n, "Name", h, data[0x08]); + + if(data[0x09] != 0x02 || h->length < 0x1A) { + dmi_battery_chemistry(sect_n, data[0x09]); +@@ -4699,7 +4374,7 @@ + + dmi_battery_capacity(sect_n, WORD(data + 0x0A), (h->length < 0x1A ? 1 : data[0x15])); + dmi_battery_voltage(sect_n, WORD(data + 0x0C)); ++ dmixml_AddTextChild(sect_n, "SBDSversion", "%s", dmi_string(h, data[0x0E])); +- dmixml_AddDMIstring(sect_n, "SBDSversion", h, data[0x0E]); + + dmi_battery_maximum_error(sect_n, data[0x0F]); + +@@ -4717,13 +4392,13 @@ + (WORD(data + 0x12) & 0x1F)); + } + if(data[0x09] == 0x02) { ++ dmixml_AddTextChild(sect_n, "SBDSchemistry", "%s", dmi_string(h, data[0x14])); +- dmixml_AddDMIstring(sect_n, "SBDSchemistry", h, data[0x14]); + } + + dmixml_AddTextChild(sect_n, "OEMinformation", "0x%08x", DWORD(data + 0x16)); + break; + ++ case 23: /* 3.3.24 System Reset */ +- case 23: /* 7.24 System Reset */ + if(h->length < 0x0D) { + break; + } +@@ -4752,7 +4427,7 @@ + dmi_system_reset_timer(sect_n, "Timeout", WORD(data + 0x0B)); + break; + ++ case 24: /* 3.3.25 Hardware Security */ +- case 24: /* 7.25 Hardware Security */ + if(h->length < 0x05) { + break; + } +@@ -4764,7 +4439,7 @@ + + break; + ++ case 25: /* 3.3.26 System Power Controls */ +- case 25: /* 7.26 System Power Controls */ + if(h->length < 0x09) { + break; + } +@@ -4772,14 +4447,14 @@ + dmi_power_controls_power_on(sect_n, "NextSchedPowerOn", data + 0x04); + break; + ++ case 26: /* 3.3.27 Voltage Probe */ +- case 26: /* 7.27 Voltage Probe */ + dmixml_AddAttribute(sect_n, "probetype", "Voltage"); + + if(h->length < 0x14) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Description", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Description", h, data[0x04]); + + dmi_voltage_probe_location(sect_n, data[0x05] & 0x1f); + dmi_probe_status(sect_n, data[0x05] >> 5); +@@ -4800,7 +4475,7 @@ + dmi_voltage_probe_value(sect_n, "NominalValue", WORD(data + 0x14)); + break; + ++ case 27: /* 3.3.28 Cooling Device */ +- case 27: /* 7.28 Cooling Device */ + if(h->length < 0x0C) { + break; + } +@@ -4825,14 +4500,14 @@ + dmi_cooling_device_speed(sect_n, WORD(data + 0x0C)); + break; + ++ case 28: /* 3.3.29 Temperature Probe */ +- case 28: /* 7.29 Temperature Probe */ + dmixml_AddAttribute(sect_n, "probetype", "Temperature"); + + if(h->length < 0x14) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Description", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Description", h, data[0x04]); + dmi_temperature_probe_location(sect_n,data[0x05] & 0x1F); + dmi_probe_status(sect_n, data[0x05] >> 5); + +@@ -4851,14 +4526,14 @@ + dmi_temperature_probe_value(sect_n, "NominalValue", WORD(data + 0x14)); + break; + ++ case 29: /* 3.3.30 Electrical Current Probe */ +- case 29: /* 7.30 Electrical Current Probe */ + dmixml_AddAttribute(sect_n, "probetype", "Electrical Current"); + + if(h->length < 0x14) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Description", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Description", h, data[0x04]); + dmi_voltage_probe_location(sect_n, data[5] & 0x1F); + dmi_probe_status(sect_n, data[0x05] >> 5); + +@@ -4878,21 +4553,21 @@ + dmi_current_probe_value(sect_n, "NominalValue", WORD(data + 0x14)); + break; + ++ case 30: /* 3.3.31 Out-of-band Remote Access */ +- case 30: /* 7.31 Out-of-band Remote Access */ + if(h->length < 0x06) { + break; + } + ++ dmixml_AddTextChild(sect_n, "ManufacturerName", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "ManufacturerName", h, data[0x04]); + dmixml_AddAttribute(sect_n, "InboundConnectionEnabled", "%i", data[0x05] & (1 << 0) ? 1 : 0); + dmixml_AddAttribute(sect_n, "OutboundConnectionEnabled", "%i", data[0x05] & (1 << 1) ? 1 : 0); + break; + ++ case 31: /* 3.3.32 Boot Integrity Services Entry Point */ +- case 31: /* 7.32 Boot Integrity Services Entry Point */ + dmixml_AddAttribute(sect_n, "NOT_IMPLEMENTED", "1"); + break; + ++ case 32: /* 3.3.33 System Boot Information */ +- case 32: /* 7.33 System Boot Information */ + if(h->length < 0x0B) { + break; + } +@@ -4900,27 +4575,27 @@ + dmi_system_boot_status(sect_n, data[0x0A]); + break; + ++ case 34: /* 3.3.35 Management Device */ +- case 34: /* 7.35 Management Device */ + dmixml_AddAttribute(sect_n, "mgmtype", ""); + + if(h->length < 0x0B) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Description", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Description", h, data[0x04]); + dmi_management_device_type(sect_n, data[0x05]); + dmixml_AddTextChild(sect_n, "Address", "0x%08x", DWORD(data + 0x06)); + dmi_management_device_address_type(sect_n, data[0x0A]); + break; + ++ case 35: /* 3.3.36 Management Device Component */ +- case 35: /* 7.36 Management Device Component */ + dmixml_AddAttribute(sect_n, "mgmtype", "Component"); + + if(h->length < 0x0B) { + break; + } + ++ dmixml_AddTextChild(sect_n, "Description", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "Description", h, data[0x04]); + dmixml_AddTextChild(sect_n, "ManagementDeviceHandle", "0x%04x", WORD(data + 0x05)); + dmixml_AddTextChild(sect_n, "ComponentHandle", "0x%04x", WORD(data + 0x07)); + +@@ -4929,7 +4604,7 @@ + } + break; + ++ case 36: /* 3.3.37 Management Device Threshold Data */ +- case 36: /* 7.37 Management Device Threshold Data */ + dmixml_AddAttribute(sect_n, "mgmtype", "Threshold Data"); + + if(h->length < 0x10) { +@@ -4974,7 +4649,7 @@ + sub_n = NULL; + break; + ++ case 37: /* 3.3.38 Memory Channel */ +- case 37: /* 7.38 Memory Channel */ + if(h->length < 0x07) { + break; + } +@@ -4995,7 +4670,7 @@ + sub_n = NULL; + break; + ++ case 38: /* 3.3.39 IPMI Device Information */ +- case 38: /* 7.39 IPMI Device Information */ + /* + * We use the word "Version" instead of "Revision", conforming to + * the IPMI specification. +@@ -5021,7 +4696,7 @@ + sub_n = NULL; + + dmi_ipmi_base_address(sect_n, data[0x04], data + 0x08, ++ h->length < 0x12 ? 0 : (data[0x10] >> 5) & 1); +- h->length < 0x11 ? 0 : (data[0x10] >> 4) & 1); + + if(h->length < 0x12) { + break; +@@ -5050,7 +4725,7 @@ + sub_n = NULL; + break; + ++ case 39: /* 3.3.40 System Power Supply */ +- case 39: /* 7.40 System Power Supply */ + if(h->length < 0x10) { + break; + } +@@ -5059,13 +4734,13 @@ + dmixml_AddAttribute(sect_n, "UnitGroup", "%i", data[0x04]); + } + ++ dmixml_AddTextChild(sect_n, "Location", "%s", dmi_string(h, data[0x05])); ++ dmixml_AddTextChild(sect_n, "Name", "%s", dmi_string(h, data[0x06])); ++ dmixml_AddTextChild(sect_n, "Manufacturer", "%s", dmi_string(h, data[0x07])); ++ dmixml_AddTextChild(sect_n, "SerialNumber", "%s", dmi_string(h, data[0x08])); ++ dmixml_AddTextChild(sect_n, "AssetTag", "%s", dmi_string(h, data[0x09])); ++ dmixml_AddTextChild(sect_n, "ModelPartNumber", "%s", dmi_string(h, data[0x0A])); ++ dmixml_AddTextChild(sect_n, "Revision", "%s", dmi_string(h, data[0x0B])); +- dmixml_AddDMIstring(sect_n, "Location", h, data[0x05]); +- dmixml_AddDMIstring(sect_n, "Name", h, data[0x06]); +- dmixml_AddDMIstring(sect_n, "Manufacturer", h, data[0x07]); +- dmixml_AddDMIstring(sect_n, "SerialNumber", h, data[0x08]); +- dmixml_AddDMIstring(sect_n, "AssetTag", h, data[0x09]); +- dmixml_AddDMIstring(sect_n, "ModelPartNumber", h, data[0x0A]); +- dmixml_AddDMIstring(sect_n, "Revision", h, data[0x0B]); + + dmi_power_supply_power(sect_n, WORD(data + 0x0C)); + +@@ -5108,7 +4783,7 @@ + sub_n = NULL; + break; + ++ case 40: /* 3.3.41 Additional Information */ +- case 40: /* 7.41 Additional Information */ + dmixml_AddAttribute(sect_n, "subtype", "AdditionalInformation"); + + if(h->length < 0x0B) { +@@ -5118,12 +4793,14 @@ + dmi_additional_info(sect_n, h); + break; + ++ case 41: /* 3.3.42 Onboard Device Extended Information */ ++ dmixml_AddAttribute(sect_n, "subtype", "OnboardDeviceExtendedInformation"); ++ +- case 41: /* 7.42 Onboard Device Extended Information */ + if(h->length < 0x0B) { + break; + } + ++ dmixml_AddTextChild(sect_n, "ReferenceDesignation", "%s", dmi_string(h, data[0x04])); +- dmixml_AddDMIstring(sect_n, "ReferenceDesignation", h, data[0x04]); + + sub_n = xmlNewChild(sect_n, NULL, (xmlChar *) "OnboardDevice", NULL); + dmi_on_board_devices_type(sub_n, data[0x05] & 0x7F); +@@ -5134,30 +4811,8 @@ + sub_n = NULL; + break; + ++ case 126: /* 3.3.43 Inactive */ ++ case 127: /* 3.3.44 End Of Table */ +- case 42: /* 7.43 Management Controller Host Interface */ +- if (h->length < 0x05) { +- break; +- } +- +- sub_n = dmi_management_controller_host_type(sect_n, data[0x04]); +- /* +- * There you have a type-dependent, variable-length +- * part in the middle of the structure, with no +- * length specifier, so no easy way to decode the +- * common, final part of the structure. What a pity. +- */ +- if (h->length < 0x09) { +- break; +- } +- if (data[0x04] == 0xF0) { /* OEM */ +- dmixml_AddTextChild(sub_n, "VendorID", "0x%02X%02X%02X%02X\n", +- data[0x05], data[0x06], data[0x07], +- data[0x08]); +- } +- sub_n = NULL; +- break; +- case 126: /* 7.43 Inactive */ +- case 127: /* 7.44 End Of Table */ + break; + + default: +@@ -5199,7 +4854,6 @@ + + static void dmi_table(Log_t *logp, int type, u32 base, u16 len, u16 num, u16 ver, const char *devmem, xmlNode *xmlnode) + { +- static u8 version_added = 0; + u8 *buf; + u8 *data; + int i = 0; +@@ -5230,12 +4884,6 @@ + return; + } + +- // FIXME: This is hackerish ... rather try to avoid looping dmi_table() calls too much +- if( version_added == 0 ) { +- dmixml_AddAttribute(xmlnode, "smbios_version", "%u.%u", ver >> 8, ver & 0xFF); +- version_added = 1; +- } +- + data = buf; + while(i < num && data + 4 <= buf + len) { /* 4 is the length of an SMBIOS structure header */ + +@@ -5405,7 +5053,7 @@ + ver = 0x0206; + break; + } ++ //printf(">>%d @ %d, %d<<\n", DWORD(buf+0x18), WORD(buf+0x16), WORD(buf+0x1C)); +- // printf(">>%d @ %d, %d<<\n", DWORD(buf+0x18), WORD(buf+0x16), WORD(buf+0x1C)); + dmi_table(logp, type, DWORD(buf + 0x18), WORD(buf + 0x16), WORD(buf + 0x1C), ver, devmem, + xmlnode); + } +--- a/src/dmidecodemodule.c 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/dmidecodemodule.c 2010-06-03 12:01:46.000000000 +0200 +@@ -53,17 +53,6 @@ + #include "dmidump.h" + #include + +-#if (PY_VERSION_HEX < 0x03030000) +-char *PyUnicode_AsUTF8(PyObject *unicode) { +- PyObject *as_bytes = PyUnicode_AsUTF8String(unicode); +- if (!as_bytes) { +- return NULL; +- } +- +- return PyBytes_AsString(as_bytes); +-} +-#endif +- + static void init(options *opt) + { + opt->devmem = DEFAULT_MEM_DEV; +@@ -481,12 +470,7 @@ + + static PyObject *dmidecode_get_section(PyObject *self, PyObject *args) + { ++ char *section = PyString_AsString(args); +- char *section = NULL; +- if (PyUnicode_Check(args)) { +- section = PyUnicode_AsUTF8(args); +- } else if (PyBytes_Check(args)) { +- section = PyBytes_AsString(args); +- } + + if( section != NULL ) { + return dmidecode_get_group(global_options, section); +@@ -604,7 +588,7 @@ + static PyObject *dmidecode_get_dev(PyObject * self, PyObject * null) + { + PyObject *dev = NULL; ++ dev = PyString_FromString((global_options->dumpfile != NULL +- dev = PYTEXT_FROMSTRING((global_options->dumpfile != NULL + ? global_options->dumpfile : global_options->devmem)); + Py_INCREF(dev); + return dev; +@@ -612,14 +596,9 @@ + + static PyObject *dmidecode_set_dev(PyObject * self, PyObject * arg) + { ++ if(PyString_Check(arg)) { +- char *f = NULL; +- if(PyUnicode_Check(arg)) { +- f = PyUnicode_AsUTF8(arg); +- } else if(PyBytes_Check(arg)) { +- f = PyBytes_AsString(arg); +- } +- if(f) { + struct stat buf; ++ char *f = PyString_AsString(arg); + + if( (f != NULL) && (global_options->dumpfile != NULL ) + && (strcmp(global_options->dumpfile, f) == 0) ) { +@@ -659,17 +638,12 @@ + + static PyObject *dmidecode_set_pythonxmlmap(PyObject * self, PyObject * arg) + { ++ if(PyString_Check(arg)) { +- char *fname = NULL; +- +- if (PyUnicode_Check(arg)) { +- fname = PyUnicode_AsUTF8(arg); +- } else if (PyBytes_Check(arg)) { +- fname = PyBytes_AsString(arg); +- } +- if (fname) { + struct stat fileinfo; ++ char *fname = PyString_AsString(arg); + + memset(&fileinfo, 0, sizeof(struct stat)); ++ + if( stat(fname, &fileinfo) != 0 ) { + PyReturnError(PyExc_IOError, "Could not access the file '%s'", fname); + } +@@ -690,7 +664,7 @@ + + warn = log_retrieve(global_options->logdata, LOG_WARNING); + if( warn ) { ++ ret = PyString_FromString(warn); +- ret = PYTEXT_FROMSTRING(warn); + free(warn); + } else { + ret = Py_None; +@@ -737,7 +711,7 @@ + {(char *)"pythonmap", dmidecode_set_pythonxmlmap, METH_O, + (char *) "Use another python dict map definition. The default file is " PYTHON_XML_MAP}, + ++ {(char *)"xmlapi", dmidecode_xmlapi, METH_KEYWORDS, +- {(char *)"xmlapi", dmidecode_xmlapi, METH_VARARGS | METH_KEYWORDS, + (char *) "Internal API for retrieving data as raw XML data"}, + + +@@ -752,9 +726,6 @@ + + void destruct_options(void *ptr) + { +-#ifdef IS_PY3K +- ptr = PyCapsule_GetPointer(ptr, NULL); +-#endif + options *opt = (options *) ptr; + + if( opt->mappingxml != NULL ) { +@@ -792,25 +763,8 @@ + free(ptr); + } + +-#ifdef IS_PY3K +-static struct PyModuleDef dmidecodemod_def = { +- PyModuleDef_HEAD_INIT, +- "dmidecodemod", +- NULL, +- -1, +- DMIDataMethods, +- NULL, +- NULL, +- NULL, +- NULL +-}; + ++PyMODINIT_FUNC initdmidecodemod(void) +-PyMODINIT_FUNC +-PyInit_dmidecodemod(void) +-#else +-PyMODINIT_FUNC +-initdmidecodemod(void) +-#endif + { + char *dmiver = NULL; + PyObject *module = NULL; +@@ -823,29 +777,19 @@ + opt = (options *) malloc(sizeof(options)+2); + memset(opt, 0, sizeof(options)+2); + init(opt); +-#ifdef IS_PY3K +- module = PyModule_Create(&dmidecodemod_def); +-#else + module = Py_InitModule3((char *)"dmidecodemod", DMIDataMethods, + "Python extension module for dmidecode"); +-#endif +- if (module == NULL) +- MODINITERROR; + ++ version = PyString_FromString(VERSION); +- version = PYTEXT_FROMSTRING(VERSION); + Py_INCREF(version); + PyModule_AddObject(module, "version", version); + + opt->dmiversion_n = dmidecode_get_version(opt); + dmiver = dmixml_GetContent(opt->dmiversion_n); ++ PyModule_AddObject(module, "dmi", dmiver ? PyString_FromString(dmiver) : Py_None); +- PyModule_AddObject(module, "dmi", dmiver ? PYTEXT_FROMSTRING(dmiver) : Py_None); + + // Assign this options struct to the module as well with a destructor, that way it will + // clean up the memory for us. ++ PyModule_AddObject(module, "options", PyCObject_FromVoidPtr(opt, destruct_options)); +- // TODO: destructor has wrong type under py3? +- PyModule_AddObject(module, "options", PyCapsule_New(opt, NULL, destruct_options)); + global_options = opt; +-#ifdef IS_PY3K +- return module; +-#endif + } +--- a/src/dmihelper.h 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/dmihelper.h 2010-06-03 12:01:46.000000000 +0200 +@@ -65,52 +65,50 @@ + } dmi_codes_major; + + static const dmi_codes_major dmiCodesMajor[] = { ++ {0, "3.3.1", "BIOS Information", "BIOSinfo"}, ++ {1, "3.3.2", "System Information", "SystemInfo"}, ++ {2, "3.3.3", "Base Board Information", "BaseBoardInfo"}, ++ {3, "3.3.4", "Chassis Information", "ChassisInfo"}, ++ {4, "3.3.5", "Processor Information", "ProcessorInfo"}, ++ {5, "3.3.6", "Memory Controller Information", "MemoryCtrlInfo"}, ++ {6, "3.3.7", "Memory Module Information", "MemoryModuleInfo"}, ++ {7, "3.3.8", "Cache Information", "CacheInfo"}, ++ {8, "3.3.9", "Port Connector Information", "PortConnectorInfo"}, ++ {9, "3.3.10", "System Slots", "SystemSlots"}, ++ {10, "3.3.11", "On Board Devices Information", "OnBoardDevicesInfo"}, ++ {11, "3.3.12", "OEM Strings", "OEMstrings"}, ++ {12, "3.3.13", "System Configuration Options", "SysConfigOptions"}, ++ {13, "3.3.14", "BIOS Language Information", "BIOSlanguage"}, ++ {14, "3.3.15", "Group Associations", "GroupAssoc"}, ++ {15, "3.3.16", "System Event Log", "SysEventLog"}, ++ {16, "3.3.17", "Physical Memory Array", "PhysicalMemoryArray"}, ++ {17, "3.3.18", "Memory Device", "MemoryDevice"}, ++ {18, "3.3.19", "32-bit Memory Error Information", "MemoryErrorInfo"}, ++ {19, "3.3.20", "Memory Array Mapped Address", "MemoryArrayMappedAddress"}, ++ {20, "3.3.21", "Memory Device Mapped Address", "MemoryDeviceMappedAddress"}, ++ {21, "3.3.22", "Built-in Pointing Device", "BuiltIntPointingDevice"}, ++ {22, "3.3.23", "Portable Battery", "PortableBattery"}, ++ {23, "3.3.24", "System Reset", "SystemReset"}, ++ {24, "3.3.25", "Hardware Security", "HardwareSecurity"}, ++ {25, "3.3.26", "System Power Controls", "SystemPowerCtrls"}, ++ {26, "3.3.27", "Voltage Probe", "Probe"}, ++ {27, "3.3.28", "Cooling Device", "CoolingDevice"}, ++ {28, "3.3.29", "Temperature Probe", "Probe"}, ++ {29, "3.3.30", "Electrical Current Probe", "Probe"}, ++ {30, "3.3.31", "Out-of-band Remote Access", "RemoteAccess"}, ++ {31, "3.3.32", "Boot Integrity Services Entry Point", "BootIntegrity"}, ++ {32, "3.3.33", "System Boot Information", "SystemBootInfo"}, ++ {33, "3.3.34", "64-bit Memory Error Information", "MemoryErrorInfo"}, ++ {34, "3.3.35", "Management Device", "ManagementDevice"}, ++ {35, "3.3.36", "Management Device Component", "ManagementDevice"}, ++ {36, "3.3.37", "Management Device Threshold Data", "ManagementDevice"}, ++ {37, "3.3.38", "Memory Channel", "MemoryChannel"}, ++ {38, "3.3.39", "IPMI Device Information", "IPMIdeviceInfo"}, ++ {39, "3.3.40", "System Power Supply", "SystemPowerSupply"}, ++ {40, "3.3.41", "-------------------", "Unknown"}, ++ {41, "3.3.42", "-------------------", "Unknown"}, ++ {126, "3.3.41", "Inactive", "Inactive"}, ++ {127, "3.3.42", "End Of Table", "EndOfTable"}, +- {0, "7.1", "BIOS Information", "BIOSinfo"}, +- {1, "7.2", "System Information", "SystemInfo"}, +- {2, "7.3", "Base Board Information", "BaseBoardInfo"}, +- {3, "7.4", "Chassis Information", "ChassisInfo"}, +- {4, "7.5", "Processor Information", "ProcessorInfo"}, +- {5, "7.6", "Memory Controller Information", "MemoryCtrlInfo"}, +- {6, "7.7", "Memory Module Information", "MemoryModuleInfo"}, +- {7, "7.8", "Cache Information", "CacheInfo"}, +- {8, "7.9", "Port Connector Information", "PortConnectorInfo"}, +- {9, "7.10", "System Slots", "SystemSlots"}, +- {10, "7.11", "On Board Devices Information", "OnBoardDevicesInfo"}, +- {11, "7.12", "OEM Strings", "OEMstrings"}, +- {12, "7.13", "System Configuration Options", "SysConfigOptions"}, +- {13, "7.14", "BIOS Language Information", "BIOSlanguage"}, +- {14, "7.15", "Group Associations", "GroupAssoc"}, +- {15, "7.16", "System Event Log", "SysEventLog"}, +- {16, "7.17", "Physical Memory Array", "PhysicalMemoryArray"}, +- {17, "7.18", "Memory Device", "MemoryDevice"}, +- {18, "7.19", "32-bit Memory Error Information", "MemoryErrorInfo"}, +- {19, "7.20", "Memory Array Mapped Address", "MemoryArrayMappedAddress"}, +- {20, "7.21", "Memory Device Mapped Address", "MemoryDeviceMappedAddress"}, +- {21, "7.22", "Built-in Pointing Device", "BuiltIntPointingDevice"}, +- {22, "7.23", "Portable Battery", "PortableBattery"}, +- {23, "7.24", "System Reset", "SystemReset"}, +- {24, "7.25", "Hardware Security", "HardwareSecurity"}, +- {25, "7.26", "System Power Controls", "SystemPowerCtrls"}, +- {26, "7.27", "Voltage Probe", "Probe"}, +- {27, "7.28", "Cooling Device", "CoolingDevice"}, +- {28, "7.29", "Temperature Probe", "Probe"}, +- {29, "7.30", "Electrical Current Probe", "Probe"}, +- {30, "7.31", "Out-of-band Remote Access", "RemoteAccess"}, +- {31, "7.32", "Boot Integrity Services Entry Point", "BootIntegrity"}, +- {32, "7.33", "System Boot Information", "SystemBootInfo"}, +- {33, "7.34", "64-bit Memory Error Information", "MemoryErrorInfo"}, +- {34, "7.35", "Management Device", "ManagementDevice"}, +- {35, "7.36", "Management Device Component", "ManagementDevice"}, +- {36, "7.37", "Management Device Threshold Data", "ManagementDevice"}, +- {37, "7.38", "Memory Channel", "MemoryChannel"}, +- {38, "7.39", "IPMI Device Information", "IPMIdeviceInfo"}, +- {39, "7.40", "System Power Supply", "SystemPowerSupply"}, +- {40, "7.41", "-------------------", "Unknown"}, +- {41, "7.42", "Onboard Device Extended Information", "OnBoardDevicesExtendedInfo"}, +- {41, "7.43", "Management Controller Host Interface", "MgmntCtrltHostIntf"}, +- {126, "7.44", "Inactive", "Inactive"}, +- {127, "7.45", "End Of Table", "EndOfTable"}, +- + {-1, NULL, NULL, NULL} + }; + +--- a/src/dmioem.c 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/dmioem.c 2017-10-31 09:06:30.317273114 +0100 +@@ -93,7 +93,7 @@ + */ + printf(h->type == 221 ? + "HP BIOS iSCSI NIC PCI and MAC Information\n" : ++ "HP BIOS NIC PCI and MAC Information\n"); +- "HP BIOS NIC PXE PCI and MAC Information\n"); + nic = 1; + ptr = 4; + while(h->length >= ptr + 8) { +--- a/src/dmixml.c 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/dmixml.c 2010-06-03 12:01:46.000000000 +0200 +@@ -41,7 +41,6 @@ + #include + #include + +-#include "dmidecode.h" + #include "dmilog.h" + #include "dmixml.h" + +@@ -164,47 +163,6 @@ + return res; + } + +-/** +- * A variant of dmixml_AddTextChild() which will do dmi_string() decoding instead of a plain string. +- * If the dmi_string() function returns NULL, it will instead add a XML node attribute 'badindex' +- * @author David Sommerseth +- * @param xmlNode* Pointer to the current node which will get the text child +- * @param const char* Name of the new tag +- * @param const struct dmi_header* Pointer to the DMI table header +- * @param u8 DMI table index of the information to be extracted and used in the XML node +- * @return xmlNode* Pointer to the new tag. On errors the return value will be NULL. On fatal +- * errors and assert() call will be done. +- */ +-xmlNode *dmixml_AddDMIstring(xmlNode *node, const char *tagname, const struct dmi_header *dm, u8 s) { +- xmlChar *tagname_s = NULL; +- xmlNode *res = NULL; +- const char *dmistr; +- +- if( (node == NULL) || (tagname == NULL) ) { +- return NULL; +- } +- +- tagname_s = xmlCharStrdup(tagname); +- assert( tagname_s != NULL ); +- +- if(s == 0) { +- res = xmlNewChild(node, NULL, tagname_s, NULL); +- dmixml_AddAttribute(res, "not_specified", "1"); +- return res; +- } +- +- dmistr = dmi_string(dm, s); +- if( dmistr == NULL ) { +- res = xmlNewChild(node, NULL, tagname_s, NULL); +- dmixml_AddAttribute(res, "badindex", "1"); +- } else { +- xmlChar *val_s = xmlCharStrdup(dmistr); +- res = xmlNewTextChild(node, NULL, tagname_s, val_s); +- free(val_s); +- } +- return res; +-} +- + /** + * Adds a text node child to the given XML node. If input is NULL, the tag contents will be empty. + * @author David Sommerseth +--- a/src/dmixml.h 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/dmixml.h 2010-06-03 12:01:46.000000000 +0200 +@@ -32,11 +32,8 @@ + + #define foreach_xmlnode(n, itn) for( itn = n; itn != NULL; itn = itn->next ) + +-struct dmi_header; +- + xmlAttr *dmixml_AddAttribute(xmlNode *node, const char *atrname, const char *fmt, ...); + xmlNode *dmixml_AddTextChild(xmlNode *node, const char *tagname, const char *fmt, ...); +-xmlNode *dmixml_AddDMIstring(xmlNode *node, const char *tagname, const struct dmi_header *dm, u8 s); + xmlNode *dmixml_AddTextContent(xmlNode *node, const char *fmt, ...); + + char *dmixml_GetAttrValue(xmlNode *node, const char *key); +--- a/src/pymap.xml 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/pymap.xml 2010-06-03 12:01:46.000000000 +0200 +@@ -1,7 +1,7 @@ + + + + +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- + + + +@@ -883,7 +858,6 @@ + + + +- + + + +--- a/src/setup_common.py 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/setup_common.py 2010-06-03 12:01:46.000000000 +0200 +@@ -26,19 +26,17 @@ + # are deemed to be part of the source code. + # + ++import commands, sys +-import subprocess, sys +-if sys.version_info[0] < 3: +- import commands as subprocess + from os import path as os_path + from distutils.sysconfig import get_python_lib + + # libxml2 - C flags + def libxml2_include(incdir): ++ (res, libxml2_cflags) = commands.getstatusoutput("xml2-config --cflags") +- (res, libxml2_cflags) = subprocess.getstatusoutput("xml2-config --cflags") + if res != 0: ++ print "Could not build python-dmidecode." ++ print "Could not run xml2-config, is libxml2 installed?" ++ print "Also the development libraries?" +- print("Could not build python-dmidecode.") +- print("Could not run xml2-config, is libxml2 installed?") +- print("Also the development libraries?") + sys.exit(1) + + # Parse the xml2-config --cflags response +@@ -54,11 +52,11 @@ + if os_path.exists("/etc/debian_version"): #. XXX: Debian Workaround... + libdir.append("/usr/lib/pymodules/python%d.%d"%sys.version_info[0:2]) + ++ (res, libxml2_libs) = commands.getstatusoutput("xml2-config --libs") +- (res, libxml2_libs) = subprocess.getstatusoutput("xml2-config --libs") + if res != 0: ++ print "Could not build python-dmidecode." ++ print "Could not run xml2-config, is libxml2 installed?" ++ print "Also the development libraries?" +- print("Could not build python-dmidecode.") +- print("Could not run xml2-config, is libxml2 installed?") +- print("Also the development libraries?") + sys.exit(1) + + # Parse the xml2-config --libs response +--- a/src/util.c 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/util.c 2017-10-31 09:06:30.311273205 +0100 +@@ -95,7 +95,7 @@ + static Log_t *sigill_logobj = NULL; + + void sigill_handler(int ignore_this) { ++ sigill_error = 1; +- sigill_error = 1; + if( sigill_logobj ) { + log_append(sigill_logobj, LOGFL_NODUPS, LOG_WARNING, + "SIGILL signal caught in mem_chunk()"); +@@ -119,19 +119,19 @@ + void *mmp; + #endif + sigill_logobj = logp; ++ signal(SIGILL, sigill_handler); +- signal(SIGILL, sigill_handler); + if(sigill_error || (fd = open(devmem, O_RDONLY)) == -1) { ++ log_append(logp, LOGFL_NORMAL, LOG_WARNING, +- log_append(logp, LOGFL_NORMAL, LOG_WARNING, + "Failed to open memory buffer (%s): %s", + devmem, strerror(errno)); ++ p = NULL; +- p = NULL; + goto exit; + } + + if(sigill_error || (p = malloc(len)) == NULL) { ++ log_append(logp, LOGFL_NORMAL, LOG_WARNING,"malloc: %s", strerror(errno)); ++ p = NULL; ++ goto exit; +- log_append(logp, LOGFL_NORMAL, LOG_WARNING,"malloc: %s", strerror(errno)); +- p = NULL; +- goto exit; + } + #ifdef USE_MMAP + #ifdef _SC_PAGESIZE +@@ -148,37 +148,37 @@ + if(sigill_error || (mmp == MAP_FAILED)) { + log_append(logp, LOGFL_NORMAL, LOG_WARNING, "%s (mmap): %s", devmem, strerror(errno)); + free(p); ++ p = NULL; ++ goto exit; +- p = NULL; +- goto exit; + } + + memcpy(p, (u8 *) mmp + mmoffset, len); ++ if (sigill_error) { +- if (sigill_error) { + log_append(logp, LOGFL_NODUPS, LOG_WARNING, + "Failed to do memcpy() due to SIGILL signal"); ++ free(p); ++ p = NULL; ++ goto exit; ++ } +- free(p); +- p = NULL; +- goto exit; +- } + + if(sigill_error || (munmap(mmp, mmoffset + len) == -1)) { + log_append(logp, LOGFL_NORMAL, LOG_WARNING, "%s (munmap): %s", devmem, strerror(errno)); ++ free(p); ++ p = NULL; ++ goto exit; +- free(p); +- p = NULL; +- goto exit; + } + #else /* USE_MMAP */ + if(sigill_error || (lseek(fd, base, SEEK_SET) == -1)) { + log_append(logp, LOGFL_NORMAL, LOG_WARNING, "%s (lseek): %s", devmem, strerror(errno)); + free(p); + p = NULL; ++ goto exit; +- goto exit; + } + + if(sigill_error || (myread(logp, fd, p, len, devmem) == -1)) { + free(p); ++ p = NULL; ++ goto exit; +- p = NULL; +- goto exit; + } + #endif /* USE_MMAP */ + +@@ -186,23 +186,8 @@ + perror(devmem); + + exit: ++ signal(SIGILL, SIG_DFL); +- signal(SIGILL, SIG_DFL); + sigill_logobj = NULL; + return p; + } + +-/* Returns end - start + 1, assuming start < end */ +-u64 u64_range(u64 start, u64 end) +-{ +- u64 res; +- +- res.h = end.h - start.h; +- res.l = end.l - start.l; +- +- if (end.l < start.l) +- res.h--; +- if (++res.l == 0) +- res.h++; +- +- return res; +-} +--- a/src/util.h 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/util.h 2010-06-03 12:01:46.000000000 +0200 +@@ -29,4 +29,3 @@ + int checksum(const u8 * buf, size_t len); + void *mem_chunk(Log_t *logp, size_t base, size_t len, const char *devmem); + int write_dump(size_t base, size_t len, const void *data, const char *dumpfile, int add); +-u64 u64_range(u64 start, u64 end); +--- a/src/version.h 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/version.h 2010-06-03 12:01:46.000000000 +0200 +@@ -1 +1 @@ ++#define VERSION "3.10.13" +-#define VERSION "3.12.2" +--- a/src/xmlpythonizer.c 2015-06-08 17:19:45.000000000 +0200 ++++ b/src/xmlpythonizer.c 2010-06-03 12:01:46.000000000 +0200 +@@ -85,7 +85,6 @@ + #include "dmilog.h" + #include "xmlpythonizer.h" + #include "version.h" +-#include "compat.h" + + + /** +@@ -647,7 +646,7 @@ + switch( val_m->type_value ) { + case ptzINT: + case ptzLIST_INT: ++ value = PyInt_FromLong(atoi(workstr)); +- value = PYNUMBER_FROMLONG(atoi(workstr)); + break; + + case ptzFLOAT: +@@ -662,7 +661,7 @@ + + case ptzSTR: + case ptzLIST_STR: ++ value = PyString_FromString(workstr); +- value = PyBytes_FromString(workstr); + break; + + default: +@@ -851,7 +850,7 @@ + switch( map_p->type_value ) { + case ptzCONST: + if( _get_key_value(logp, key, 256, map_p, xpctx, 0) != NULL ) { ++ value = PyString_FromString(map_p->value); +- value = PyBytes_FromString(map_p->value); + PyADD_DICT_VALUE(retdata, key, value); + } else { + PyReturnError(PyExc_ValueError, "Could not get key value: %s [%i] (Defining key: %s)", +--- a/unit-tests/Makefile 2015-06-08 17:19:45.000000000 +0200 ++++ b/unit-tests/Makefile 2010-06-03 12:01:46.000000000 +0200 +@@ -1,7 +1,5 @@ +-PY_BIN := python2 +- + test : ++ python unit -vv +- $(PY_BIN) unit -vv + + clean : + rm -f *.{py[oc],o,so} *~ +--- a/unit-tests/unit 2015-06-08 17:19:45.000000000 +0200 ++++ b/unit-tests/unit 2010-06-03 12:01:46.000000000 +0200 +@@ -2,9 +2,8 @@ + #.awk '$0 ~ /case [0-9]+: .. 3/ { sys.stdout.write($2 }' src/dmidecode.c|tr ':\n' ', ' + + from pprint import pprint ++import os, sys, random, tempfile, time ++import commands +-import os, sys, subprocess, random, tempfile, time +-if sys.version_info[0] < 3: +- import commands as subprocess + from getopt import getopt + + # Setup temporary sys.path() with our build dir +@@ -33,7 +32,7 @@ + COLOR = True + elif o in ("-h", "--help"): + HELP = True ++except getopt.GetoptError, err: +-except getopt.GetoptError as err: + # print help information and exit: + HELP = True + ERROR = True +@@ -139,7 +138,7 @@ + ################################################################################ + + #. Let's ignore warnings from the module for the test units... ++err = open('/dev/null', 'a+', 0) +-err = open('/dev/null', 'a+', 1) + os.dup2(err.fileno(), sys.stderr.fileno()) + + vwrite(LINE, 1) +@@ -209,7 +208,7 @@ + "Skip testing API function, missing root privileges: dmidecode.dump()" + ), 1) + ++ types = range(0, 42)+range(126, 128) +- types = list(range(0, 42))+list(range(126, 128)) + bad_types = [-1, -1000, 256] + sections = [ + "bios", +@@ -264,7 +263,7 @@ + test(output is not False) + if output: + vwrite(" * %s\n"%black(output.keys()), 1) ++ except LookupError, e: +- except LookupError as e: + failed(e, 1) + + for i in bad_types: +@@ -280,15 +279,15 @@ + try: + output = dmidecode.type(i) + if dmidecode_bin: ++ _output = commands.getoutput("dmidecode -t %d"%i).strip().split('\n') +- _output = subprocess.getoutput("dmidecode -t %d"%i).strip().split('\n') + test(len(_output) == 1 and len(output) == 0 or True) + else: + test(output is not False) + if output: + vwrite(" * %s\n"%output.keys(), 1) ++ except IOError, e: +- except IOError as e: + failed(e, 1) ++ except LookupError, e: +- except LookupError as e: + failed(e, 1) + + +@@ -331,7 +330,7 @@ + try: + output_node = dmixml.QueryTypeId(i) + test(isinstance(output_node, libxml2.xmlNode)) ++ except Exception, e: +- except Exception as e: + failed(e, 1) + except: + failed() +@@ -348,7 +347,7 @@ + try: + output_doc = dmixml.QuerySection(section) + test(isinstance(output_doc, libxml2.xmlDoc)) ++ except Exception, e: +- except Exception as e: + failed(e, 1) + except: + failed() +@@ -356,9 +355,9 @@ + except IOError: + skipped() + ++except ImportError, err: +-except ImportError as err: + failed() ++ print err +- print(err) + + vwrite(LINE, 1) + vwrite("Devices : %s\n"%cyan(len(devices)), 1) diff --git a/SPECS/python-dmidecode.spec b/SPECS/python-dmidecode.spec new file mode 100644 index 0000000..0b647c1 --- /dev/null +++ b/SPECS/python-dmidecode.spec @@ -0,0 +1,166 @@ +%{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")} +%{!?python_ver: %global python_ver %(%{__python} -c "import sys ; print sys.version[:3]")} + +Summary: Python module to access DMI data +Name: python-dmidecode +Version: 3.12.2 +Release: 4%{?dist} +License: GPLv2 +Group: System Environment/Libraries +URL: https://github.com/nima/python-dmidecode/ +Source0: %{name}-%{version}.tar.xz +Source1: generate-tarball.sh +BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root +Requires: libxml2-python +BuildRequires: libxml2-python +BuildRequires: libxml2-devel +BuildRequires: python-devel +ExcludeArch: s390x + +Patch0: disable-old-smbios-warning.patch +Patch1: revert-interface-changes.patch +Patch2: disable_loading_dmidecodemodule_on_non_x86_64.patch + +%description +python-dmidecode is a python extension module that uses the +code-base of the 'dmidecode' utility, and presents the data +as python data structures or as XML data using libxml2. + +%prep +%setup -q +%patch0 -p1 +%patch1 -p1 +%patch2 -p1 + +%build +make build +cd unit-tests +make +cd .. + +%install +rm -rf $RPM_BUILD_ROOT +python src/setup.py install --root $RPM_BUILD_ROOT --prefix=%{_prefix} + +%clean +rm -rf $RPM_BUILD_ROOT + + +%files +%defattr(-,root,root,-) +%doc README doc/README.upstream doc/LICENSE doc/AUTHORS doc/AUTHORS.upstream +%{python_sitearch}/dmidecodemod.so +%{python_sitearch}/dmidecode.py +%{python_sitearch}/dmidecode.py[co] +%if "%{python_ver}" >= "2.5" +%{python_sitearch}/*.egg-info +%endif +%{_datadir}/python-dmidecode/ + +%changelog +* Fri Aug 02 2019 Lianbo Jiang - 3.12.2-4 +- Disable loading the dmidecodemodule on non-x86_64 +- Resolves: #1688725 + +* Sun Jul 22 2018 Lianbo Jiang - 3.12.2-3 +- Modified upstream URL reference +- Resolves: #1583926 + +* Sun Jul 22 2018 Lianbo Jiang - 3.12.2-3 +- Disable build for s390x +- Resolves: #1509936 + +* Mon Nov 6 2017 Petr Oros - 3.12.2-2 +- Revert interface changes +- Resolves: #1504033 + +* Mon Mar 13 2017 Petr Oros - 3.12.2-1 +- Update to new release +- Resolves: #1431548 + +* Fri Jan 24 2014 Daniel Mach - 3.10.13-11 +- Mass rebuild 2014-01-24 + +* Fri Dec 27 2013 Daniel Mach - 3.10.13-10 +- Mass rebuild 2013-12-27 + +* Mon Jun 20 2013 Ales Ledvinka - 3.10.13-9 +- Attribute installed may appear as duplicate and cause invalid XML. + +* Mon Jun 17 2013 Ales Ledvinka - 3.10.13-8 +- Attribute dmispec may cause invalid XML on some hardware. +- Signal handler for SIGILL. + +* Thu Feb 14 2013 Fedora Release Engineering - 3.10.13-7 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild + +* Sat Jul 21 2012 Fedora Release Engineering - 3.10.13-6 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Thu Jul 19 2012 Ales Ledvinka 3.10.14-5 +- Upstream relocated. Document source tag and tarball generation. + +* Sat Jan 14 2012 Fedora Release Engineering - 3.10.13-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild + +* Tue Feb 08 2011 Fedora Release Engineering - 3.10.13-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Thu Jul 22 2010 David Malcolm - 3.10.13-2 +- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild + +* Tue Jun 15 2010 Roman Rakus - 3.10.13-1 +- Update to new release + +* Fri Mar 12 2010 Nima Talebi - 3.10.12-1 +- Update to new release + +* Tue Feb 16 2010 Nima Talebi - 3.10.11-1 +- Update to new release + +* Tue Jan 12 2010 Nima Talebi - 3.10.10-1 +- Update to new release + +* Thu Jan 07 2010 Nima Talebi - 3.10.9-1 +- Update to new release + + +* Thu Dec 15 2009 Nima Talebi - 3.10.8-1 +- New Upstream release. +- Big-endian and little-endian approved. +- Packaged unit-test to tarball. +- Rewritten unit-test to be able to run as non-root user, where it will not + try to read /dev/mem. +- Added two dmidump data files to the unit-test. + +* Thu Nov 26 2009 David Sommerseth - 3.10.7-3 +- Fixed even more .spec file issues and removed explicit mentioning + of /usr/share/python-dmidecode/pymap.xml + +* Wed Nov 25 2009 David Sommerseth - 3.10.7-2 +- Fixed some .spec file issues (proper Requires, use _datadir macro) + +* Wed Sep 23 2009 Nima Talebi - 3.10.7-1 +- Updated source0 to new 3.10.7 tar ball + +* Wed Jul 13 2009 David Sommerseth - 3.10.6-6 +- Only build the python-dmidecode module, not everything + +* Wed Jul 13 2009 David Sommerseth - 3.10.6-5 +- Added missing BuildRequres for libxml2-python + +* Wed Jul 13 2009 David Sommerseth - 3.10.6-4 +- Added missing BuildRequres for python-devel + +* Wed Jul 13 2009 David Sommerseth - 3.10.6-3 +- Added missing BuildRequres for libxml2-devel + +* Wed Jul 13 2009 David Sommerseth - 3.10.6-2 +- Updated release, to avoid build conflict + +* Wed Jun 10 2009 David Sommerseth - 3.10.6-1 +- Updated to work with the new XML based python-dmidecode + +* Sat Mar 7 2009 Clark Williams - 2.10.3-1 +- Initial build. +