/* ***** BEGIN LICENSE BLOCK *****

 * Version: MPL 1.1/GPL 2.0/LGPL 2.1

 *

 * The contents of this file are subject to the Mozilla Public License Version

 * 1.1 (the "License"); you may not use this file except in compliance with

 * the License. You may obtain a copy of the License at

 * http://www.mozilla.org/MPL/

 *

 * Software distributed under the License is distributed on an "AS IS" basis,

 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

 * for the specific language governing rights and limitations under the

 * License.

 *

 * The Original Code is the Netscape security libraries.

 *

 * The Initial Developer of the Original Code is

 * Netscape Communications Corporation.

 * Portions created by the Initial Developer are Copyright (C) 1994-2000

 * the Initial Developer. All Rights Reserved.

 *

 * Contributor(s):

 *

 * Alternatively, the contents of this file may be used under the terms of

 * either the GNU General Public License Version 2 or later (the "GPL"), or

 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

 * in which case the provisions of the GPL or the LGPL are applicable instead

 * of those above. If you wish to allow use of your version of this file only

 * under the terms of either the GPL or the LGPL, and not to allow others to

 * use your version of this file under the terms of the MPL, indicate your

 * decision by deleting the provisions above and replace them with the notice

 * and other provisions required by the GPL or the LGPL. If you do not delete

 * the provisions above, a recipient may use your version of this file under

 * the terms of any one of the MPL, the GPL or the LGPL.

 *

 * ***** END LICENSE BLOCK ***** */

/* General NSPR 2.0 errors */

/* Caller must #include "<rerror.h> */

ER2( PR_OUT_OF_MEMORY_ERROR,    "Memory allocation attempt failed." )

ER2( PR_BAD_DESCRIPTOR_ERROR,   "Invalid file descriptor." )

ER2( PR_WOULD_BLOCK_ERROR,  "The operation would have blocked." )

ER2( PR_ACCESS_FAULT_ERROR,     "Invalid memory address argument." )

ER2( PR_INVALID_METHOD_ERROR,   "Invalid function for file type." )

ER2( PR_ILLEGAL_ACCESS_ERROR,   "Invalid memory address argument." )

ER2( PR_UNKNOWN_ERROR,      "Some unknown error has occurred." )

ER2( PR_PENDING_INTERRUPT_ERROR,"Operation interrupted by another thread." )

ER2( PR_NOT_IMPLEMENTED_ERROR,  "function not implemented." )

ER2( PR_IO_ERROR,       "I/O function error." )

ER2( PR_IO_TIMEOUT_ERROR,   "I/O operation timed out." )

ER2( PR_IO_PENDING_ERROR,   "I/O operation on busy file descriptor." )

ER2( PR_DIRECTORY_OPEN_ERROR,   "The directory could not be opened." )

ER2( PR_INVALID_ARGUMENT_ERROR, "Invalid function argument." )

ER2( PR_ADDRESS_NOT_AVAILABLE_ERROR, "Network address not available (in use?)." )

ER2( PR_ADDRESS_NOT_SUPPORTED_ERROR, "Network address type not supported." )

ER2( PR_IS_CONNECTED_ERROR,     "Already connected." )

ER2( PR_BAD_ADDRESS_ERROR,  "Network address is invalid." )

ER2( PR_ADDRESS_IN_USE_ERROR,   "Local Network address is in use." )

ER2( PR_CONNECT_REFUSED_ERROR,  "Connection refused by peer." )

ER2( PR_NETWORK_UNREACHABLE_ERROR, "Network address is presently unreachable." )

ER2( PR_CONNECT_TIMEOUT_ERROR,  "Connection attempt timed out." )

ER2( PR_NOT_CONNECTED_ERROR,    "Network file descriptor is not connected." )

ER2( PR_LOAD_LIBRARY_ERROR,     "Failure to load dynamic library." )

ER2( PR_UNLOAD_LIBRARY_ERROR,   "Failure to unload dynamic library." )

ER2( PR_FIND_SYMBOL_ERROR,  

"Symbol not found in any of the loaded dynamic libraries." )

ER2( PR_INSUFFICIENT_RESOURCES_ERROR, "Insufficient system resources." )

ER2( PR_DIRECTORY_LOOKUP_ERROR,     

"A directory lookup on a network address has failed." )

ER2( PR_TPD_RANGE_ERROR,        

"Attempt to access a TPD key that is out of range." )

ER2( PR_PROC_DESC_TABLE_FULL_ERROR, "Process open FD table is full." )

ER2( PR_SYS_DESC_TABLE_FULL_ERROR, "System open FD table is full." )

ER2( PR_NOT_SOCKET_ERROR,   

"Network operation attempted on non-network file descriptor." )

ER2( PR_NOT_TCP_SOCKET_ERROR,   

"TCP-specific function attempted on a non-TCP file descriptor." )

ER2( PR_SOCKET_ADDRESS_IS_BOUND_ERROR, "TCP file descriptor is already bound." )

ER2( PR_NO_ACCESS_RIGHTS_ERROR, "Access Denied." )

ER2( PR_OPERATION_NOT_SUPPORTED_ERROR, 

"The requested operation is not supported by the platform." )

ER2( PR_PROTOCOL_NOT_SUPPORTED_ERROR, 

"The host operating system does not support the protocol requested." )

ER2( PR_REMOTE_FILE_ERROR,  "Access to the remote file has been severed." )

ER2( PR_BUFFER_OVERFLOW_ERROR,  

"The value requested is too large to be stored in the data buffer provided." )

ER2( PR_CONNECT_RESET_ERROR,    "TCP connection reset by peer." )

ER2( PR_RANGE_ERROR,        "Unused." )

ER2( PR_DEADLOCK_ERROR,     "The operation would have deadlocked." )

ER2( PR_FILE_IS_LOCKED_ERROR,   "The file is already locked." )

ER2( PR_FILE_TOO_BIG_ERROR,     

"Write would result in file larger than the system allows." )

ER2( PR_NO_DEVICE_SPACE_ERROR,  "The device for storing the file is full." )

ER2( PR_PIPE_ERROR,         "Unused." )

ER2( PR_NO_SEEK_DEVICE_ERROR,   "Unused." )

ER2( PR_IS_DIRECTORY_ERROR,     

"Cannot perform a normal file operation on a directory." )

ER2( PR_LOOP_ERROR,         "Symbolic link loop." )

ER2( PR_NAME_TOO_LONG_ERROR,    "File name is too long." )

ER2( PR_FILE_NOT_FOUND_ERROR,   "File not found." )

ER2( PR_NOT_DIRECTORY_ERROR,    

"Cannot perform directory operation on a normal file." )

ER2( PR_READ_ONLY_FILESYSTEM_ERROR, 

"Cannot write to a read-only file system." )

ER2( PR_DIRECTORY_NOT_EMPTY_ERROR, 

"Cannot delete a directory that is not empty." )

ER2( PR_FILESYSTEM_MOUNTED_ERROR, 

"Cannot delete or rename a file object while the file system is busy." )

ER2( PR_NOT_SAME_DEVICE_ERROR,  

"Cannot rename a file to a file system on another device." )

ER2( PR_DIRECTORY_CORRUPTED_ERROR, 

"The directory object in the file system is corrupted." )

ER2( PR_FILE_EXISTS_ERROR,  

"Cannot create or rename a filename that already exists." )

ER2( PR_MAX_DIRECTORY_ENTRIES_ERROR, 

"Directory is full.  No additional filenames may be added." )

ER2( PR_INVALID_DEVICE_STATE_ERROR, 

"The required device was in an invalid state." )

ER2( PR_DEVICE_IS_LOCKED_ERROR, "The device is locked." )

ER2( PR_NO_MORE_FILES_ERROR,    "No more entries in the directory." )

ER2( PR_END_OF_FILE_ERROR,  "Encountered end of file." )

ER2( PR_FILE_SEEK_ERROR,    "Seek error." )

ER2( PR_FILE_IS_BUSY_ERROR,     "The file is busy." )

ER2( PR_IN_PROGRESS_ERROR,

"Operation is still in progress (probably a non-blocking connect)." )

ER2( PR_ALREADY_INITIATED_ERROR,

"Operation has already been initiated (probably a non-blocking connect)." )

#ifdef PR_GROUP_EMPTY_ERROR

ER2( PR_GROUP_EMPTY_ERROR,  "The wait group is empty." )

#endif

#ifdef PR_INVALID_STATE_ERROR

ER2( PR_INVALID_STATE_ERROR,    "Object state improper for request." )

#endif

#ifdef PR_NETWORK_DOWN_ERROR

ER2( PR_NETWORK_DOWN_ERROR, "Network is down." )

#endif

#ifdef PR_SOCKET_SHUTDOWN_ERROR

ER2( PR_SOCKET_SHUTDOWN_ERROR,  "The socket was previously shut down." )

#endif

#ifdef PR_CONNECT_ABORTED_ERROR

ER2( PR_CONNECT_ABORTED_ERROR,  "TCP Connection aborted." )

#endif

#ifdef PR_HOST_UNREACHABLE_ERROR

ER2( PR_HOST_UNREACHABLE_ERROR, "Host is unreachable." )

#endif

/* always last */

ER2( PR_MAX_ERROR,      "Placeholder for the end of the list" )